CV, Instrumentation And Controls Project Engineer Seeking Work In UK

Available

Serial No: 35442

Job Seeker Location

×

Close

Skills keywords: allen bradely, automation engineer, control logix, installation and commissiong, instrumentation and control, plc engineer

Short Bio:

I have 4 years of work experience in the field of installation, commissioning, conducting FAT and SAT procedures, Control Logix, SLC, PLC5, Factory Talk SE, ME.

Current location:  201301 - View on map

Nationality: Indian

Preferred Sector of Employment:  , Oil, Gas and Energy, Pharmaceutical and Science

Spoken languages: english

Location I am interested in working: Anywhere

Professional Skills

Automation and Control system development, System Integration, Support, Field Installation. Superior ability to resolve complex and usual automation system problems.

Automation and Control Engineering

• PLC programming: ControlLogix (RSLogix 5000), SLC 500/03, Omron (CP1E, CP1H), Siemens (S7-200,300,400)

• HMI/SCADA Configuration : Factory Talk(SE and ME), RSview32, Allen Bradley (Panel View 300,600) Omron HMI(NB7Q, NB5Q), Delta HMI(A-series and B-series),

• Industrial Networks and Communication : Ethernet, Modbus RTU, Power Monitor(500, 5000), Prosoft Modbus Communication, Asset Management System (Rockwell Automation)

• Motors and AC and DC drives, Servo drives(1394 Allen Bradley), Powerflex 4m-40m, Altivar

• Presence Plus Vision sensors, Reed switches, Proximity, RTD, Photo sensors, Absolute and Incremental Encoders, Optical fibre based sensors, Flow meter, Siemens Sonic Sensors, Pressure transmitters, Foxboro Conductivity sensors, Foxboro Specific gravity sensors, Servo Valves, Solenoid Valves, Limit switches, Gas Chromatograph, Laser Sensors, IR sensors, Pressure Switches, Analog Sensor calibration and maintenance,Guard master Safety relays, Control Valves

• P&ID diagrams, Panel Design and development, Panel Wiring(NPN/PNP), Pneumatic connection

Software Development

• Ladder Programming(RS logix 5000, RS logix 500, Rslinx, Simatic Manager, CX programmers) HMI and SCADA programming(Factory Talk, RS view32, NB designer, Screen Editor, DOP soft)

Professional Experience

Experience in project-commissioning and maintenance in industries with PLC’s, SCADA, HMI, Drives, Sensors, Field Instruments installation.
Rockwell Automation India Pvt. Ltd
Dec 2013 – Present

Project Engineer

• Client Luk Oil Uzbekistan

Job : Commissioning of HEC E-Kandym

Software Used : RSlogix 5000, Prosoft Configuration Builder, Network Communication, Asset Management System

Description: Development of logic, FAT and SAT procedure. Commissioning is under progress and the plant is running. Working on the project for past 8 months.

• Client British Petroleum, Trinidad and Tobago

Job: Commissioning of Burner Management System

Software Used: Guard Logix (Safety Controller)

Description: The project includes two BMS system. The 1st BMS system includes FAT which was done remotely from India. For BMS 2 the FAT and SAT was done at the Honeywell site and at British Petroleum site.

• Client William Grant, Scotland

Job: Logic development in SFC.

Software used: RS logix 5000, GEMS code manager

Description: This project includes development of development of logic in SFC. The task defines phases and according to phases the logic has to be developed. The Control modules are generated using GEMS. The project was commissioned successfully and achieved best performance award for the project.

• Client JIFFCO, Jordan and Thermax India

Job : Commissioning Support for BCs and BMS

Software Used : Factory Talk ME and RS logix 5000

Description: Provided Commissioning support to Themax India for Boiler Control System and Burner Management System. Developed logic and modified graphics screen according to customer needs onsite. Communicated Modbus Data over Anybus Device to and from Yokogawa DCS system.

SysMech Enterprise, Gurgaon
July  2012 – Dec 2013

Sr. Automation Engineer

• Coordinate the full process, from analysis, design and development including implementation of the Electrical, Instrumentation and Automation part of projects during all stages of the projects.

• Design, develop automation framework and data driven automation scripts for application: PLCs, HMIs, SCADA (Permission based control, data logging, trends and reporting).

• Writing functional analyses, coordination of programming, testing, implementation and documentation of projects

• Management of a project team/ several project teams respecting budgets and deadlines

• IO allocation, Module allocation, process segregation for IO allocation.

• Interfacing Electrical Instrumentation and third party devices to Industrial computer networks.

• Providing training to the customer.

• Commissioning of Machines onsite and overseas.

• Major Clients ( Nipro India, Medisafe)

Completed projects:

• Automatic Wing Assembly Machine (320 Digital I/Os)

• UV curing (150 Digital I/Os)

• Needle Fixing (85 Digital I/Os)

• Cup Forming Machine (60 Digital I/Os)

• Facing and Centring Machine (40 Digital I/Os)

• Corrugation plant (20 Digital I/Os, DC motors and DC drives, Absolute encoders)

• Yashikawa Welding Robot (72 Digital I/Os)

Education & Qualifications

Birla institute of Technology, Mesra,Ranchi

• M.E. in Instrumentation and Control Engineering(2009-2011)

• Published a research paper in International Journal of Earth Science and Engineering.
“Simultaneous Measurement of Strain and Curvature using FBG and a CFBG”

West Bengal University of Technology, Kolkata

• B.Tech in Electronics and Communication Engineering(2005-2009)

• Qualified GATE-2009 with 88.53 percentile

Project work

ME project

• “Multi-parameter measurement using a cascaded FBG system”: Worked in a group of two and an advisor Dr.S.k.Ghorai. In this project, a cascaded Fibre Bragg Grating system was realized which will measure three parameters i.e. strain, temperature and curvature. An embedded structure was developed as a prototype to test the FBG system. The composite was prepared using Hand lay- up and Vacuum technique. The structures were mounted on a UTM machine and applied load upto 400kgs which corresponds to 25000 micro-strain. The results were recorded in OSA which was remotely placed 1km away from UTM machine. The temperature measurement was performed by putting LPG in a hot water bath and the corresponding signals were recorded in OSA. Transfer matrix method was used to get the reflection and transmission spectra.

• Software used: MATLAB

• Hardware used: DSP kit F2812, OSA, SLED source, Photo-detector

Personal Details

Date of Birth : 5th Feb 1986

Languages known : English, Hindi, Bengali