Seeking a position as an electrical engineer in the field of electrical & electronics design, manufacturing and maintenance, where my knowledge, creativity and personal skills can be employed and developed.
Bachelor Degree : BSc Electrical Engineering.
University : The University of Faisalabad.
Project Name: Power Generation By Road Ramps & controlled by PLC
Project Grade : Excellent
Last Year Grade : Very Good
Accumulated Grade : Very Good
Graduation Year : 2011.
ELECT 33070- A license as a Registered Engineer by Pakistan engineering Council in Pakistan
Mechatronics Engineering Solutions (From 15July 2013 to 1 Aug 2013)
(Training consisting of advance HMI, SCADA).
Precision System Training Center (From 15 April to 1 June 2014)
Energy crisis and its remedial measurements conference. (28 July 2011)
Renewable energy sources and Pakistan energy crisis solution. (03 January 2011
1) Electro Automates Lahore
[From 03 May.2011 to 30 December 2011]
(Worked as a trainee automation & control engineer)
Erection, Installation, Electrical & Instrumentation System Up gradation of Printing Plant at Tariq Tiles Ltd, Sheikhpura.
Upgrade relay based control system with PLC based control system comprising of 300 I/Os in a record time of four months. The project included construction of new control room, laying of new cables, preparation of I/O Chart, development of ladder logic, development of HMI, Field instruments wiring, tagging and termination, development of all necessary documentation and drawings. Listing of all necessary spares and ordering. Development of trouble shooting and preventive maintenance documents. Development of HMI.
2) Masco Energy Services Lahore.
[From 01 Jan.2012 to 30 November 2012]
Worked as an assistant electrical engineer.
I was engaged with the implementation of maintenance methodologies including preventive, Predictive etc. I worked on Gas & Diesel Gensets control system, PLCS, MV Switchgears, and Motors etc.
Development of trouble shooting and preventive maintenance documents. Monitoring of Load balancing. Fault troubleshooting in switch yard 33KV/11KV, control panels, relay panels. During my period I was engaged with the installation & commissioning team for 8 weeks to install 2 new Gensets and installation of motors dampers & control systems of W.H.R.B lightning system designing at (Masco spinning Mills).
3)MECHATRONICS ENGINEERING SOLUTION.
[From 07 December.2012 up to 3 Jan.2015]
Worked as an automation engineer.
Around 2 years of diversified experience in the field of automation with the knowledge of both Project Management with Value Engineering and Design Drawings of electrical control systems, LV Schematics, Load calculation, Selection of Cables, Voltage drop calculations and designing of Scada system and Siemen’s plc system as per IEC. Troubleshooting of Scada and Plc system in different industrial units.
Preparation of electrical drawings, project schedule, reviews engineering plans and specifications. Up gradation of Conveyor system project at Standard Engineering pvt Limted by siemens Plc s7 300 and Win cc Scada v7.2.Installed the Wincc Scada system at Gulistan power Generation for controlling 5 Gensets from control room on single visual screen. Electrical system designing for residential and commercial buildings.
Communication of Vfd,s by profibus and use of Dp couplers.
Buildings automation systems and building electrical system designing.
Well experienced on Siemens, ABB switch gears, PLC,s and HMI programing, control and electrical system designing.
Remote I/Os communication and handling.
Complete knowledge of sizing and selection of MCB,ECB,MCCB,ELCRB,RCD and ACB.
Thorough knowledge of short circuit current calculations, arc flash calculations and load flow by using ETAP software and electrical calculators.
Well experienced in troubleshooting and attending problems On-load tap changers, MV
Switch gears, LT breakers (VCB) and MCC panels.
Commissioning and operation of LV switchgears, MV switchgears, Generator transformers.
Simatic HMI and Scada designing on Wincc Flexible and wincc explorer.
Erection & commissioning of 11kv switchyard gantries & all equipment’s.
Electrical system desiging using Autocade electrical and Dialux.
Thorough knowledge of power plant electrical system designing and maintenance.
Sound knowledge of absorption type HVAC system, fire tube, water tube boilers and axil, centrifugal oil free air compressors.
Sound knowledge of all safety standard and quality standard at working site
Having strong working skills either as team member or team leader.
Urdu : Mother Tongue
English :Speak Proficiently
1) Microsoft Windows.
2) Wincc Flexible 2008.
3) AutoCAD Elect 2013.
4) Siemens Step-7.
5) Ecodial 3.8.
6) WinCC SCADA v7.2.
Before you fill out our registration form, we feel it necessary to pass on some important information.
After completing our registration process your details are checked over by our Validation Team. Their task is to upload suitable submissions or delete.
Registrations that pass validation automatically produce an online CV Profile. Due to the popularity of our website profiles are widely seen by prospective employers. On a daily basis we receive many Profile enquiries.
By following our guidelines your profile will pass our validation process.
Key points to note
Your aim should be to produce a fantastic online CV Profile.
Our task is to find you meaningful employment.