Corrosion and Pipeline Expert In Oil and Gas

Available
Serial No: 6149
Skills keywords: 
Current location:  Județul Prahova, Romania - View on map
Spoken languages: english, french, italian, romanian, russian

Professional Experience:

Date: from (month /year)

to (month / year) 07/2010 -10/2010

Company Name: IREM

Field of activity: Construction

Approx. no. of employees: Leading 50 workers

Other details about the company: Construction of NEXBTL PLANT. (NESTE OIL)

Location: Netherlands – Rotterdam

Department: Construction and Inspection

Position: Painting and Insullation Supervisor

Responsibilities: – I led a team of 50 workers, I paint and isolated execution of the pipes of different sizes ( 1 inch – 40 inches ).

– I have followed the company `s prescriptions .

Date: from (month /year)

to (month / year) 07/2008 -12/2008 and 05/2009-present

Company Name: GSP Steell

Field of activity: Shutdown and Bringing up-to-date Equipment

Approx. no. of employees: Leading 50 workers

Other details about the company: Subcontractor of Rohrer Industrial Services

Location: Romania, Petrobrazi

Department: Mechanical Construction

Position: Head of Mechanical Construction on Site

Responsibilities: – co-coordinating and super visioning of: metallic construction, fighting corrosion, paint and insulation pipe

– super visioning pipe flush and neutralization

– co-coordinating scaffolds’ mounting and demounting

– following Rohrer requirements and normative

Date: from (month /year)

to (month / year) 12/2008-04/2009

Company Name: Dietsmann Technologie International

Field of activity: CONSTRUCTION and INSPECTION

Approx. no. of employees: Leading team of 8 members

Other details about the company: Part of Dietsmann and Comerint Company

Location: Rusia / Novii Urengoi (SAMBURSKI PLANT )

Department: Construction and Inspection

Position: Inspector of MATERIAL & CORROSION Specialist

Responsibilities: I supervised exterior and interior inspection, reconditioning and recertification for the following equipments in order to continue startup for Samburski plant:

– static equipment (gas separator, degas separator, gas ejector, stage condensate separator, degassing vessel separator, stage condensate separator, gas exchanger , de-ethaniser column ,condensate heater-furnaces)

– dynamic equipment (gas cooler- degasor separator, condensate delivery pumps)

– pipes

– metallic constructions.

All the work was done under Dietsmann’s prescription.

Date: from (month /year)

to (month / year) 01/2008 05/2008

Company Name: Technip

Field of activity: Shutdown and Bringing up-to-date Equipment

Approx. no. of employees: Leading team of 20 members

Other details about the company: Part of Technip Comapny from Rome

Location: Quatar, Las Rafan Industrial City

Department: Mechanical and Piping

Position: Mechanical Supervisor

Responsibilities: – supervising disassemble of valves, pipes, metallic constructions for Oryx GTL Plant 2158 Project

– supervising mounting of valves, pipes, metallic construction

– leading team including: supervisors, foremen and working personnel

Date: from (month /year)

to (month / year) 07/2007 – 09/2007

Company Name: Saipem

Field of activity: Construction of a new factory

Approx. no. of employees: Leading team of 22 members

Other details about the company: Part of Saipem Comapny from Italy

Location: Construction Supervisor

Department: Mechanical Construction

Position: Construction Supervisor

Responsibilities: – supervising construction for GOSP1 and GOSP3 (Khuaris Cent. Prod. Facility project) under Saipem regulation and requirements

– scheduling transport of metallic construction according to different phase of project

– pre-assembly of metallic construction, transportation and mounting it on site

– leading team including: supervisors, foremen and working personnel

Date: from (month /year)

to (month / year) 01/2006 – 05/2006

Company Name: Technika UK

Field of activity: Erecting gas pipes of 42 inches în desert

Approx. no. of employees: Leading team of 15 members

Other details about the company: Join venture from London to Tripoli

Location: Libyan desert

Department: Construction and Inspection

Position: Inspector for corrosion and painting

Responsibilities: – I led the work of painting and protection of the pipeline of 42 inches. I performed local repair protection system where prescription technique allowed me.

– supervising fighting corrosion and painting for project PN 1018-103A gas transmission pipeline to coastal network

– verifying coat thickness and testing coat adhesion for 42 inch gas pipes, according with Technika requirements

Date: from (month /year)

to (month / year) 09/2004 – 03/2005

Company Name: Snamprogetti

Field of activity: Construction of a chemical plant complex

Approx. no. of employees: Leading team of 12 members

Other details about the company: Part of Snamprogetti Company from Italy/Milano

Location: Libya, Melitha

Department: Construction and Inspection

Position: Inspector for Corrosion , Painting and Insulation

Responsibilities: – supervising the work of painting and insulation from cold and hot, for pipe size ( 1 inch – 48 inches )

– supervising cathodic protection for pipes, metallic equipment and construction using Snamprogetti regulation

– supervising fighting corrosion at structure, installation and equipment

– working under specific regulations in co-operation with companies such as: Bonatti, Bentini and Hyundai.

-coordinating the preparation for applying coats on metal surfaces that were blown (respecting the condition that measured humidity should not be more than 85%, no dust and air temperature and dew point were determined

– applying 1stcoat and checking up coat thickness and drying time

– applying 2ndcoat after checking up 1st coat and repairing it when needed

– checking up coat thickness and testing coat adhesion when needed

-verifying stored paint in controlled temperature condition

-supervising and inspecting works corrosion

-insulation ( cold and hot )and painting works to : pipe , static and dynamic equipments ( heat exchangers , columns , furnaces , reactors , pumps , compressors , filters , etc ) , metal construction

All the work was done using Snamprogetti requirements

Date: from (month /year)

to (month / year) 06/2001

04/2002

Company Name: Mobil Exxon

Field of activity: Meintenance of oceanic platforms

Approx. no. of employees: Leading team of 14 members

Other details about the company: From Nigeria

Location: Eket, Atlantic Ocean

Department: Construction and Inspection

Position: Offshore Corrosion Supervisor

Responsibilities: – I have led and organized painting and insulation works to pipes and equipments from various offshore installations

– leading and coordinating the preparation for applying anticorrosion coats (metal surfaces were blown using Abrasive Expendable – Eurogrit Straalgrit, no free Silca, but no more than 75 microns profile measured using Testex Tape)

– determination of corroded wall thickness of structure, installation and equipment, determination of protective technologies (the thickness of the wall was ultrasonic measured, respecting the condition that measured humidity should not be more than 85%, steel piece, air temperature and dew point were determined)

– applying different anticorrosion treatments (all conditions being fulfilled 1st coat was applied using Amercoat 385-Buff Polyamide Epoxy diluted with Amercoat 65 and Amercoat 12 cleaner, after drying-about 2½ hours at 20º C-1st coat was verified, then 2nd coat was applied, using Amercoat 385-Red, third coat was applied after drying and verification, using Amercoat 450S Beige Aliphatic Polyurethane diluted with Amercoat 920, all coats being applied by brushing, spraying, rolling etc., for hard conditions using Riserbond.A. Resim with Riserbond.B. Comerter and Bio- Dur 561 (Epoxy Base – White; Curing Agent- White; Promotor L-ZN), technical counseling when needed

– checking up the thickness of the applied anti-corrosion coats.

– fighting corrosion preparation and execution works for: pipes, pomps, compressor, heat exchangers and boilers at N.P.M. 23, 25, 27 and 28 platforms.

Observations:

All the work was done using the next requirements: ‘Painting specification for the riser repair project of Mobil’, ‘Riser repair project installation of Riserclad procedure’, ‘Riser repair project painting procedure’, leading 20-worker team, daily contacts with technical and operating divisions, daily reports of the work situation.

Date: from (month /year)

to (month / year) 04/1998

07/1998

Company Name: Kaduna Refinery

Field of activity: Shutdown and Bringing up-to-date Equipment

Approx. no. of employees: Leading team of 30 members and 50 collaborators

Other details about the company: From Nigeria

Location: Kaduna

Department: Construction

Position: Mechanical Engineer Supervisor

Responsibilities: – revision and repairment of the round and table kiln (pipe, burner and elbow replacement)

– revision of columns (plate replacement)

– revision and replacement of heat exchangers

– pipe fittings

– maintaining and ordering equipment stock

– repair and mounting of the centrifugal pump (DAV, petroleum and diesel hydrogenation).

Observations:

Running pressure tests of the replaced and repaired implements and pipes including preparation and putting into running, leading workers and 50 collaborators following the Total Nigeria normative and prescriptions, daily contacts with supervising personnel for work coordination and reports. Supervising pipe and pipe-holder prefabrication according to technical diagrams and requirements. Supervising mounting and testing of pipes and pipe-holders, according to technical requirements. Supervising prefabrication and mounting of pipe section.

Date: from (month /year)

to (month / year) 02/1983

06/2000

Company Name: INCERP S.A. Ploiesti (Research Institute for Oil Refineries and Petrochemistry)

Field of activity: Construction, Meintenance and Planning

Approx. no. of employees: Leading team of 30 members

Other details about the company: From Romania, Ploiesti

Location: Ploiesti

Department: Mechanical

Position: Head of the Mechanical Department

Responsibilities: I organized and pursued painting and insullation works on pipelines and equipments in installation.

Involved in organizing and supervising the execution of experimental-productive installations:

– additives

– special oils

– dielectric fluids (cooling liquid for high-power transformers)

– C2 resins (already working within Petrobrazi S.A.-Brazi Petrochemical Works).

– Coordinating the mounting of equipment and putting into running these pilot-plants.

– Participating into putting in running of ABA type steam boiler working at 2t/h, in charge with supervising of the thermo-technical team within mechanical department, maintaining and ordering piece stock for: centrifugal pumps, compressors, pipes, steam boiler, heat exchangers, boilers, dealing with networks and utilities systems for: steam cooling, water, air, nitrogen, hydrogen.

– Leading all experimental-productive installation fighting corrosion works taking in account substances and materials used.

Observations:

– Having 30 subordinates: locksmith, joiners, plumbers, painters, and stokers, including foremen.

– Supervising prefabrication and mounting of pipes and pipe-holders according to diagrams and technical prescriptions and requirements .

Date: from (month /year)

to (month / year) 08/1979

01/1983

Company Name: Petrobrazi S.A. Ploiesti

Field of activity: Construction of new equipment

Approx. no. of employees: 2 employees

Other details about the company: From Romania

Location: Ploiesti

Department: Construction

Position: Mechanical Engineer, Site Supervisor

Responsibilities: Following up the execution of erection works performed of different types of static and dynamic equipment within the following plants:

– butadiene rubber, co-operation with companies such as: Anderson (drying lines), Galaratesi, Tai Braying (polymerizing equipment), Donkyni (compressor fing)

– high-pressure polyethylene ( Snamprogetii license), co-operation with Novo Pignionne for the erection of the reactor and for the mounting of high-pressure pipes in accordance with the genuine technology.

– maintaining and ordering piece stock for pipe, pomp, column, boiler, compressor, heat exchanger mounting

Observations:

Supervising the correct mounting of lines and equipment according to the design, observing the mounting and isometric plants. Participating in the performing pressure tests for pipes and equipment afferent to the polybutadeinic rubber plant and in the pre-commissioning and putting into running of the plant. Supervising pipes and pipe-holder prefabrication , according to diagrams.

Supervising mounting and testing of pipes, according to technical requirements

Date: from (month /year)

to (month / year) 06/1975

01/1979

Company Name: Petrobrazi S.A. Ploiesti

Field of activity: Construction an Meintenance Equipment

Approx. no. of employees: Leading team of 30 members

Other details about the company: From Romania

Location: Ploiesti

Department: Boilership Dpt.

Position: Mechanical Engineer

Responsibilities: Involving in organizing and supervising the execution of revision, repairment and maintaining and ordering stock for:

-columns (mounting trays and execution of pressured tests)

-repairing heat exchangers, furnaces, utilities networks for plants like CDU & VDU, FCCU

-catalytic reforming

-dimethil terephtalate

-pyrolisis

-coating

Education:

Important: State whether these qualifications are equivalent to BSc or MSc!

Institution: Date: (from –to) Degree obtained

Oil and Gas Institute of Ploiesti,

Faculty of Technological Equipment, 1975 1970 – 1975 MBS

.Other certificates obtained (e.g. training courses etc)

-Maintenance and repairment of the equipment and installation for the chemical industry, 1981

-Corrosion prevention and fighting, 1984

-Authorization in the design, execution and exploitation of the gas distribution systems, 1982

– TPIT HSE Basic Course. CONSTRUCTION SAFETY TRAINING SYSTEM at TECHNIP ITALY S.p.A. 01.07.2008

-Authorization for supervision and technical checking of pressured mechanical equipment and hoisting units, ISCIR, 1983.-

Language Skills: (Marked one to five for competence)

Language Reading Speaking Writing

English Average Average Average

French Average Average Average

Russian Beginner Beginner Beginner

Computer knowledge:

Windows 9x, 2000, XP, Office 9x, Internet Explorer

 






popup-img