CV, Automation, Service, Commissioning Engineer

Available
Serial No: 48625
Skills keywords: automation engineer
Current location:  Emilia-Romagna, Italy - View on map
Nationality: Italian
Spoken languages: english, italian

PROFESSIONAL EXPERIENCE

15/09/2015 – 01/04/2016
EXERGY ORC – OLGIATE OLONA (VARESE)  ITALY
COMMISSIONING ENGINEERr

Main activities and responsibilities:

-Commissioning of Organic Rankine Cycle plants

– Software modifies of existing codes using Siemens Simatic Manager Step7

– Check hardware configuration and profibus network

– SCADA Software modifies using Wincc Flexible, Movicon

– Setup instrumentation (Speed sensors, Vibration transmitters, PILZ Safety relays)

– Test of pumps and valves (as digital as analog valves)

– Test PLC Input/Output

– Electrical switchboards’ modifies

– Check Voltages and currents

– Parametrization of Drives Siemens Sinamics

– Projects followed:

Italy – Arezzo. About 1 week. First introductory plant. Assistance and training for the first start up

Bulgaria – Varna. About 2 weeks: Electrical and Scada modifications for the customer Trakya Glass.

Turkey – Yenisehir. About 2 months in November and December 2015 for the commissioning of a whole plant for the customer Trakya Glass.

• Salary 42000€ gross per annum

21/01/2015 – 20/07/2015
AVL ITALY – MARANELLO (MODENA), ITALY
COMMISSIONING & SERVICE ENGINEER

Main activities and responsibilities:

– Commissioning of engine Test Beds

– Cabling of electrical switchboards

– Projects followed in General Motors in Torino and Magneti Marelli in Bologna

– Training in Graz: Puma Open set up and parameters

• Reason of the change Temporary contract (6 months)

• Salary 39200€ gross per annum

28/04/2014 – 15/01/2015
IMAL GROUP, MODENA, ITALY
PLC SOFTWARE AND ELECGTRICAL ENGINEER (COMMISSIONING AND SERVICE)

• Main activities and responsibilities:

– Software development with 50% standard code and 50% customised code using Simatic Manager Step7

– Test Input/Output

– Test of voltages and currents and electrical modifies on power supply switchboards and check emergency circuits with various kinds of relays as PILZ, Siemens, Jakob, Allen Bradley or Schneider

– Hardware configuration for the communication among CPU Siemens S7 and distribuited systems ET200S and/or ET200M and drives Sinamics G120 using as Profibus network connections as Ethernet connections

– Parametrization of Variable Speed Drives Sinamics G120 and S120, SEW

– Software modifies for the configuration of SCADA using WinCC Flexible

– Cabling of electrical switchboards

– Software test for industrial automation plants on site: test in manual way of motors and valves.

– Test in automatic way

– Programming training PLC S7 – PRO1

– The company produces machineries for the processing of the wood, from the trees to the wood panels (Debarkers, dryers, forming systems on conveyors, resination systems, dosing systems, press systems chippers)

– Projects followed:

Belarus – Vitebsk. About 2 months in September and October 2014 for the commissioning and modification (software and electrical) of a Forming line for the wood panel production for the customer OAO Vitebskdrev.

• Reason of the change Better conditions of contract employment and salary of AVL Italy

• Salary 25000€ gross per annum (temporary contract employment of 2 years)

01/10/2013 – 15/04/2014
KERGLASS ENGINEERING, BAISO (REGGIO EMILIA), ITALY
PLC SOFTWARE AND ELECTTRICAL ENGINEER (COMISSIONING AND SERVICE)

Main activities and responsibilities:

– Software development using RS Logix 5000 and 500 of Allen Bradley (50% standard code and 50% customised code)

– Test of voltages and currents and electrical modifies on power supply switchboards and check emergency circuits woth various kinds of relays as PILZ, Siemens, Jakob, Allen Bradley or Schneider

– Parametrization of Variable Speed Drives Control Tecnique with “CTSoft” and Allen Bradley with “Drive” software

– Preparing SCADA software using Movicon

– Cabling of electrical switchboards

– Manufacturing sector: glass processing. The company produces machineries for the processing of the glass: oven for the tempering, serigrafy, lamination.

– Projects followed:

Lohne – Germany. About 1 month in November/December 2013 for the commissioning of an oven for the tempering of the glass for the factory of the customer Fenske

Mexico (4 locations: Mexico City, Puebla, Monterrey,Leon). About 12 days in March 2014 of service for the reparation and electrical fault finding and software modifies.

• Reason of the change Economic crisis of the company

• Salary 20000€ gross per annum (temporary contract employment of 1 year)

01/03/2013 – 31/08/2013
PROLOGIC S.R.L. – AUTOMATION INDUSTRIAL SYSGTEMS – MODENA, ITALY
CAD ELECTRICAL DESIGNER AND TECHNICIAN

Main activities and responsibilities:

– Realization of electrical drawings using the software SPAC Automation (Italian software)

– Cabling of electrical switchboards

• Reason of the change Temporary employment contract (6 months)

• Salary 18000€ gross per annum

11/2011 – 12/2012
SPAZIO ENERGIA, MODENA, ITALY
ELECTRICAL PROJECT DESIGNER OF PHOTOVALTAIC AND WIND PLANTS

Main activities and responsibilities:

– Responsible of the electrical project of photovoltaic and wind plants (grid connected in low voltage)

– Technical survey

– Dimensioning of photovoltaic systems (DC section)

– Electrical project design for the connection of photovoltaic system at the electrical local grid in low voltage I-project, Sienergy Integra and AutoCAD 2D

– Authorization’s request for the connection at the electrical network

– Support to the Sales Department

– Order of photovoltaic panels – inverter – electrical equipment (sporadically)

– Test on site: currents, voltages, solar power and check of the results, commissioning

– Upgrade of the Inverters DC/AC Power One and SMA according to the new electrical italian regulatory

– Photovoltaic plant monitoring and control

– Projects: About 40 plants of various size: between 3 kW and 180 kW, for a total amount of circa 300kW connected at the electrical net.

• Reason of the change Closure of the company following the economic crisis and lack of work after 10 months

• Salary 30000€ gross per annum

06/2010 – 06/2011
TEKNA ENERGY S.R.L. FOGGIA, ITALY
ELECTRICAL PROJECT DESIGNER OF PHOTOVOLTAIC AND WIND PLANTS

Main activities and responsibilities:

– Electrical project of photovoltaic and wind plants (grid connected in low voltage)

– Technical survey

– Dimensioning of photovoltaic systems (DC section)

– Electrical project design for the connection of photovoltaic system at the electrical local grid in low voltage using I-project, Sienergy Integra and AutoCAD 2D

– Authorization’s request for the connection at the electrical network

– Process of statal incentive obtainment (from GSE)

– Order photovoltaic panels – inverters – electrical equipment – support structures

– Support to the Sales Department

– Test on site: currents, voltages, solar power and check of the results

– Projects: About 50 plants of various size: between 3 kW and 100 kW, for a total amount of more than 500kW connected at the electrical net.

• Reason of the change Better contract employment conditions in Spazio Energia

• Salary 30000€ gross per annum

05/2009 – 06/2010
P4 ENERGY S.R.L. – LUCERA (FOGGIA) ITALY
ELECTRICAL PROJECT DESIGNER OF PHOTOVOLTAIC AND WIND PLANTS

Main activities and responsibilities:

– Electrical project design of photovoltaic and wind plants (grid connected in medium voltage)

– Technical design of photovoltaic systems (DC section and AC section) using AutoCAD 2D

– Dimensioning of photovoltaic systems (DC section)

– Electrical project for the connection at the electrical medium voltage grid: dimensioning of switches, cables, cables-switches coordination, design LV/MV substations using I-project, Sienergy Integra

– Authorization’s request for the connection at the electrical network

– Process of statal incentive obtainment (from GSE)

– Order electrical equipment (switches, disconnectors, contactors, relays, fuses, switchboards, cables)

– Support to the Sales Department

– Test on site: currents, voltages, solar power and check of the results

– Projects: About 50 plants of various size: between 3 kW and 100 kW, for a total amount of more than 500kW connected at the electrical net.

• Reason of the change Better conditions in Tekna

• Salary 15000€ gross per annum

08/2006 – 07/2008
BETA 2002  S.R.L., FOGGIA, ITALY
TECHNICAL CONSULTANT

Main activities and responsibilities:

– Upgrade of the database of the fiber optic network

– Upgrade of the distribution network of copper cable

• Reason of the change Temporary collaboration as freelancer

• Salary 15000€ gross per annum

QUALIFICATIONS

 10/1997 – 25/07/2006
Politecnica delle Marche – Ancona – Electronic Engineering – Master’s degree Electronic Engineer (Final Grade: 101/110) – Member of the Italian engineer register (from 12/2006)
Qualification achieved Electronic Engineer

TECHNICAL SKILLS AND COMPETENCIES

Programming software PLC: Siemens: Simatic Manager – Step7 IEC61131 – HMI System Simatic Wincc Flexible,

Programming software PLC: Allen Bradley: Rs Logix 5000 – Rs Logix 500

Parametrization and setting of Siemens variable speed drives: Sinamics G120 and S120, SEW, Control tecnicque, Allen Bradley

Fieldbus: Profibus, Profinet (for Siemens) and Devicenet (for Allen Bradley)

Software for SCADA: Movicon; WinCC flexible

Software for setting variable speed drives Control tecnique e Allen Bradley: CT Soft and Drive

SPAC Automation for electrical design (Italian software to draw electrical schemes)

MS Office

AutoCAD 2D

Software for the project design of LV and MV electrical systems: I-Project (Schneider Electric) – Sienergy Integra (Siemens) – Tisystem (Bticino)

Knowledge of safety relays Pilz, Schmersal, Siemens, Jakob, Allen Bradley, Schneider Electric

C language programming (Basic knowledge from University)

Matlab (Basic knowledge from University)

Electrical planning in Low voltage and medium voltage

Project of photovoltaics plants connected at grid of low voltage

Project of photovoltaics plants connected at grid of medium voltage

Dimensioning of photovoltaics plants as in DC section (connection between solar modules and inverter) as in AC section

Project of electrical connection of wind plants in medium voltage

 

 

DRIVING LICENCE Driving license full and clean class B

 






popup-img