Logo
Tel:
+44 (0) 2079890750
Logo
Objective
Multiple disciplined Electrical and Instrument Engineer with a wide range of experience gained in the Sewage water treatment plant, Oil& Gas refinery, Power plant exploration sectors and BMS. To take up a challenging career in Electrical, and Instrumentation field.
Profile
Acquired extensive exposure in the field of Electrical, Control and Instrumentation in Sewage water plant, Oil and Gas refinery exploration sectors, Commissioning and Testing work (Including Co-ordination, Design, Installation, testing and commissioning of E&I). I have got more than 12 years of experience in E&I field experience in Singapore & overseas in various Oil & Gas Industry. I have practiced all the requirements of the same in my day to day activities. I am always a positive thinking and a hard working to achieve the set project. I had been working with all EPCM like Keppel, Hitachi, Shell, Foaster Wheeler, AL-Latifia and L&T India.
I have worked in India, Singapore, Malaysia, and Qatar thus working with many nationalities such as American, English, Irish, Scottish, Russian, Kazakh, Saudi, Filipinos, Pakistani, Japanese, Chinese, Malay, Korean, Indians and Australian people with different cultures and beliefs.
I have held the positions of Senior Instrument Engineer, Instrumentation Engineer, E&I Engineer, Electrical Engineer and QA/QC Inspector with most forms of Process Instrumentation in both hazardous and non hazardous areas.
I have worked in Maintenance, Construction, Inspection, Commissioning, Start Up, QA/QC and Completions.
I have experience in supervision, inspection, work scheduling, planning, documentation control and material procurement. I can work solo or in a team, depending on the requirement. With most forms of Process Instrumentation in both hazardous and non hazardous areas.
Equipment & control systems I have worked on include Siemens S7400H, PLC S7300, Alan Bradley PLC, Modicon PLC, Mitsubishi PLC, Texas PLC’s Honeywell 3000 and Yokogawa DCS. Simplicity SCADA system, Adroid SCADA system, In touch SCADA system and Nuevo Pignone and Hitachi compressors. Fire & gas detection, Smart instrumentation as well as a wide range of pneumatic, hydraulic and electronic field instrumentation and control equipment.
Qualifications
Bachelor of Engineering in Electrical & Electronics Engineering Degree 2004 India
The Rajaas Engineering Collage, Tamil Nadu, India
Higher Secondary School – 75% 2000 India
Secondary School – 75% 1998 India
Training / Seminar Attended
o Oil/Petrochemical Safety orientation course certificate OPS-20090 -2009
o Confined space hazards Awareness Training (MOM) -2010
o H2S Awareness & Escape Course
Key Experience
o To supervise the E&I pre-commissioning, commissioning activities in conjunction with Operation team.
o Evaluating all electrical and instrumentation design documents and ensuring all instrumental works are performed in accordance with project agreements, safety and quality standards.
o Live Plant interface of Electrical & Instrument & Control Systems
o Managing technical interfaces related to Electrical & Instrumentation within FEED participating to project design construction and commissioning for activities related to instrumentation.
o Supervise Instruments & Controls installation, such as, SCADA, PLCs, analyzers (AITs), PITs, FITs, FS, LITs, MOVs, TEs, TIC, PIs, LS, etc
o Pre-commissioning and Commissioning checks
o Coordination with the Authorities/Professionals involved in Projects such as Professional Engineers (PE), consultants, and clients Controls and tests of all type of Electrical and Instrument system
o Solves routine problems independently and complex problems in less familiar situations with minimal supervisory guidance.
o Siemens S7 400H: Multiple Systems, networked to workstations via Ethernet; Modbus
Link to SCADA
o Development of instrumentation logic and loop diagrams
Experience Summary: – Total Experience 12 years
Feb 2012 to Present
Keppel Seghers Engineering
Singapore Pte Ltd
Sr. E&I Engineer
Doha, State of Qatar
Aug 2011 to Jan 2012
Hitachi Plant Technologies
E&I Engineer
Singapore
Jan 2010 to July 2011
Shell Eastern Petroleum Pte Ltd
E&I Engineer Station in offshore terminal.
Singapore
July 2007 to Dec 2009
Foaster Wheeler Asia pacific Pte ltd
E&I Engineer Station in offshore terminal
Singapore
Aug 2006 to Jun 2007
Al-Latifia Trading & Contractors
Electrical Engineer
Saudi Arabia.
July 2004 to July 2006
Larson & Toubro ECC Division
Electrical Engineer
India
Dec 2003 to Dec 2004
Tuticorin Thermal Power station
In plant trainee
India
Skills & Expertise:
o Good working experience in various phases of Projects like Basic Engineering, Front End Engineering Design (FEED), and Detailed Engineering including Project Co-ordination.
o P & ID preparation and HAZOP study, preparation of instrument specifications, control valve and flow meter Sizing.
o INTOOLS 7.0 DCS/PLC engineering activities – (Yokogawa CS 3000, Emerson Delta V, Allen Bradley Process Logics)
o Preparation of specifications, bid evaluation, I/O list, graphics specifications, cause and effects diagram, Boolean logic diagram, loop schematics, segment diagram, segment loading calculation and Factory acceptance test.
o Foundation Fieldbus Instrumentation.
o Safety Interlock review, Instrument Protective functions, SIL study, Hazardous Area instrumentation.
o Field engineering include preparation of instrument plot plan (points and lines), hook up diagram, field termination diagram, cable list, estimation of erection bill of material such cables, tubes and structural steel etc
o Instrument procurement activities such as interaction with vendors, technical evaluation of bids and preparation of purchase recommendation and also shop floor inspection.
o Conversant with procedures suiting ISO-9000 quality requirements.
o Familiar with various National & International Standards/codes such as API, ISA, IEC, ISO, ANSI, ASTM, ASME, NEC, NFPA used in Instrumentation & Control design, SHELL DEP Standards.
o Design calculation of Control valves and flow meters by FLOWEL.
Duties and Responsibilities:
o In charge of all electrical & instrument installations such as the following:
o 415V & 690V MCCs & VFDs, Distribution Boards for Lightings & small power, and Control Panels as well as Instrument Junction Boxes, LCS, etc….
o Develop all instrument indices to include instrument index, I/O List, instrument ranges and alarm set points and logic drawings.
o Assist in the design development of the P&IDs, cause and effect, control narratives, cable and cable tray layouts.
o Provide design assistance for the identification, selection and sizing of all field instrumentation, including control valves. Review and approve the technical bid evaluations and material requisitions for all field instrumentation, including control valves.
o Conduct SIL study and participate in joint discipline HAZOP review. Perform other design or feasibility studies as required.
o Conduct Factory and Integrated Factory Acceptance Tests for all process automation system equipment.
o Lead site instrument loop and functional testing for all field instrumentation, to include package instrumentation for all equipment skids, rotating equipment, vessels, tanks, etc.
o Lead all site process automation system and instrumentation construction and pre-commissioning activities.
o Resolve technical queries related to construction or testing on a timely basis and support end user commissioning activities as required.
o Develop and maintain a strong working relationship with all project team members, technical personnel, interface and support organizations, and end users.
o Coordinate with all involved organizations, conduct all design review and construction progress meetings related to the process automation system and field instrumentation.
o Provide technical support for project management activities through the entire project life cycle.
o Be responsible for scope, change control, cost, schedule, quality and safety through all phases of the project within your assigned area.
o Liaising with other Departments HSE, QA/QC, PRC, Operation, etc in order to collect and provide suitable technical information when necessary.
o Coordinating with Client for material Inspection & verifications and approvals.
o Reporting to Technical manager for taking up Internal /External communication work reports day to day
o Responsible for calibration of process control instruments and authorize to make calibration reports as per standards.
o Supervision of Installation of Tray, Instrument cable laying, Cable Continuity Checks, Meggering and Termination of cables.
o Studying the P&ID, Hook-up & Wiring Diagram, logic diagram, Trips & interlocks. Actively involved in Functional Checking, pre commissioning, Calibration, Testing and Commissioning of complete instrument.
o Coordinate and verify the punch list items and make necessary activity for clearing the punch list.
o Arrange for work permit for works and inspection to be carried out in manifold.
Employment History
Work Experience
Company: Keppel Seghers Engineering Singapore Pte Ltd, Qatar State of Doha (EPCM)
Position: Lead E&I Engineer
Period: Feb 2012– To date
Duties:
• Managing field Supervisor while doing Cold loop checks, fault finding and commissioning loops on the Overhead and Pumps, Screens, Flushing gates, MCC, Washer compactor, Clarifier.
• Inspection of instrument, LV and HV cable laying, glanding and termination and testing activities.
• Inspection of installation of switchgear, UPS, transformer and ring main unit pre commissioning and commissioning activities.
• Inspection of instrument installations, calibration, tubing, pre-commissioning activities etc.
• Inspection of installation of F&G PLC, SCADA, CCTV access control system and hard ware and associated cabling and all other Field Instruments activities etc.
• Inspection of fiber optic cable laying, splicing and termination activities
• Familiar to various Electrical & Instrument inspection activities related to DCS, ESD, PLC & SCADA, MCC, SWGR,Hard ware installation and associated cabling and all other Field Instruments such as Foundation Field bus, Smart Transmitters, instrument Calibration, installation, Cable Gland and terminations, Loop Checking & Pre-Commissioning Activities.
• Issue of work completion report after onsite measurement/survey and assessing the reports submitted by sub contractor on daily / weekly / accomplishment basis.
• Using programs such as Infoworks to find data sheets and loop drawings as well as Thule to manage and monitor the loop checking for the section.
• Compiling Test folders with data, loop check, loop drawings, Vendor Instrument index, Modbus schedule, RIO, P&ID’s, Location Drawing and Test Sheets.
• Working with Siemens vendors to commission loop for the field instruments intrinsic safe barriers.
• Review of sub-contractor Job Safety Analyses / method statements and any critical tasks to ensure the sub-contractors execute such works in safe and responsible manner.
• Ensure proper co-ordination of activities and liaise closely with Project or Chief Field Engineer to resolve any engineering issues or queries.
• Inspect and witness all the construction works in accordance with the sub-contractors inspection and testing plans.
• Participate in FATs (Factory Acceptance Test) in vendor premises.
• Raise Quality Observation Report or Non-Conformance Report as per Site Quality Plan for the deficiency or non-conformance of the work.
• Raise Field Instructions and estimates the resources for the variations and additional scope of work of the sub-contractor.
• Report to E&I Commissioning Manager for the site daily and weekly activities based on overall schedule.
• Supervise & carryout Loop check and Commissioning of field instruments like Foundation Fieldbus and Hart Transmitters, Control & Shutdown valves, vibration & speed sensors, Thermocouples, RTD’s and Switches as a part of PMC activities.
• Main responsibilities were Loop checking and Function test activities, but also involved in other instrumentation related activities like start-up support and Troubleshooting.
• Involved in Functional Test, Logic Test and Sequence Test for different type of packages like Boiler, Steam Turbine Generator, Emergency Diesel Generator, Air compressor & dryer, cooling water systems.
• Preparation and execution of Pre-commissioning and Commissioning dossiers includes IO list, test sheet, loop drawing, data sheet and alarm management.
Calibration, inspection and maintenance of major field instruments including temperature
indicators and transmitters, control valves (I/Ps, Positioners), pressure transmitters, differential pressure transmitters, Mag flow meters, Ultrasonic level transmitters ,Flow indicators and Transmitters ,radio transmitters and turbidity measurement. Regulators, gas detectors, PRV, level indicators, solenoid valves, pressure and temp. Gauges, recorders, SMART transmitters from handheld HART communicator, etc.
• Supervise the process flow with integrated pumps and control systems,PLC/SCADA/Profibus technology
• Point to Point Test, Install &Termination –Field Instrument, JB’s, RIO Panel’s MCC and Loop Checking assist with cold and hot commissioning.
Work Experience
Company: Hitachi Plant Technologies, Singapore (EPCM)
Position: E&I Engineer
Period: Aug 2011 – Jan 2012
Duties:
• In charge of all Electrical & Instrument installations such as the following:
• Power Transformers with ratings 15MVA, 22/6.6kV; 10MVA 22/6.6kV and below 6.6kV& 415 VFDs for the same respective ratings of the motorized pumps (from 37 KW up to 1.8 MW)
• Fully conversant with CMS programs typically WinPCS
• Producing ITR & FTR Test records Preparation & supervision of: ITR`s FTR`
• Interface in trouble shooting DCS/SCADA/PLC.
• Cause &Effect, Functional Logic, Control System Architecture, Process
Control write-up
• Accumulate as Builds Loop drawing and P&IDs.
• Review System Architecture drawings, Loop drawings, Relay Diagrams, Layout of Control Panels & Auxiliary Panel.
• Room Cabinets; field RTUs, DCS, SCADA and MCC
• Carrying out design constructability reviews
• Collate Review Documentation Certification for hand Over Pkgs
Hand over from Contractor to client dept.
• Able to coordinate organize and display leader ship qualities multinational and multi discipline Teams
• To liaise with Sub Contractors and Vendors on site.
• To progress the flow of works in a timely manner to allow future work to be progressed and implicated into the planning 6 week gate Look ahead
• Preparation and execution of Pre-commissioning and Commissioning dossiers includes IO list, test sheet, loop drawing, data sheet and alarm management.
• Co-ordination with Client, sub-contractors, Field engineering, Vendor and Construction team during pre mechanical completion activities.
Work Experience
Company: Shell Eastern Petrochemical Pvt ltd, Singapore (EPCM)
Position: E&I Engineer
Period: Jan 2010 – July 2011
Duties:
• Rising Request for Inspection to Client. Final electrical Load tests, commissioning and getting approval from client & authorities Responsible for preparing all procedures, preparing all forms and follow all Electrical and Instrument installation at site (Cable tray – Conduit – Panels – Cable pulling & Termination – Grounding – Instrument installation – Instrument calibration – Battery room – Analyzer – All loop check – All tests of L.V. Cables …etc).
• Monitor the site construction activities to ensure that the PTW requirements and Company SHE procedures and Standards are being complied.
• Monitor the progress of works and ensure the contractors are meeting the requirements of the project specifications, drawings, and appropriate standards.
• Review of sub-contractor Job Safety Analyses / method statements and any critical tasks to ensure the sub-contractors execute such works in safe and responsible manner.
• Ensure proper co-ordination of activities and liaise closely with Project or Chief Field Engineer to resolve any engineering issues or queries.
• Inspect and witness all the construction works in accordance with the sub-contractors inspection and testing plans.
• Participate in FATs (Factory Acceptance Test) in vendor premises.
• Raise Quality Observation Report or Non-Conformance Report as per Site Quality Plan for the deficiency or non-conformance of the work.
• Raise Field Instructions and estimates the resources for the variations and additional scope of work of the sub-contractor.
• Report to E&I Superintendent for subcontractors daily and weekly activities based on overall schedule.
• Supervise & carryout Loop check and Commissioning of field instruments like Foundation Fieldbus and Hart Transmitters, Control & Shutdown valves, vibration & speed sensors, Thermocouples, RTD’s and Switches as a part of PMC activities.
• Main responsibilities were Loop checking and Function test activities, but also involved in other instrumentation related activities like start-up support and Troubleshooting.
• Involved in Functional Test, Logic Test and Sequence Test for different type of packages like Boiler, Steam Turbine Generator, Emergency Diesel Generator, Air compressor & dryer, cooling water systems.
• Familiar with Emerson DeltaV DCS, Triconex IPS, BMS (Triconex) and GE Bently Nevada Machine Monitoring systems.
• Preparation and execution of Pre-commissioning and Commissioning dossiers includes IO list, test sheet, loop drawing, data sheet and alarm management.
• Co-ordination with Client, sub-contractors, Field engineering, Vendor and Construction team during pre mechanical completion activities.
• Commissioning, Operations and maintenance: Calibration, inspection and maintenance of major field instruments including temperature indicators and transmitters, control valves (I/Ps, positioners), pressure transmitters, regulators, gas detectors, PRV, level indicators, solenoid valves, pressure and temp. Gauges, recorders, SMART transmitters from handheld HART communicator, etc.
Work Experience
Company: Foaster Wheeler Asia Pacific Pvt ltd, Singapore (EPCM)
Position: E&I Engineer
Period: 2007 Aug – 2009 Dec
Duties:
• Monitor the site construction activities to ensure that the PTW requirements and Company SHE procedures and Standards are being complied.
• Monitor the progress of works and ensure the contractors are meeting the requirements of the project specifications, drawings, and appropriate standards.
• Review of sub-contractor Job Safety Analyses / method statements and any critical tasks to ensure the sub-contractors execute such works in safe and responsible manner.
• Ensure proper co-ordination of activities and liaise closely with Project or Chief Field Engineer to resolve any engineering issues or queries.
• Inspect and witness all the construction works in accordance with the sub-contractors inspection and testing plans.
• Participate in FATs (Factory Acceptance Test) in vendor premises.
• Raise Quality Observation Report or Non-Conformance Report as per Site Quality Plan for the deficiency or non-conformance of the work.
• Raise Field Instructions and estimates the resources for the variations and additional scope of work of the sub-contractor.
• Report to E&I Superintendent for subcontractors daily and weekly activities based on overall schedule.
• Supervise & carryout Loop check and Commissioning of field instruments like Foundation Fieldbus and Hart Transmitters, Control & Shutdown valves, vibration & speed sensors, Thermocouples, RTD’s and Switches as a part of PMC activities.
• Main responsibilities were Loop checking and Function test activities, but also involved in other instrumentation related activities like start-up support and Troubleshooting.
• Involved in Functional Test, Logic Test and Sequence Test for different type of packages like Boiler, Steam Turbine Generator, Emergency Diesel Generator, Air compressor & dryer, cooling water systems.
• Familiar with Emerson DeltaV DCS, Triconex IPS, BMS (Triconex) and GE Bently Nevada Machine Monitoring systems.
• Preparation and execution of Pre-commissioning and Commissioning dossiers includes IO list, test sheet, loop drawing, data sheet and alarm management.
• Co-ordination with Client, sub-contractors, Field engineering, Vendor and Construction team during pre mechanical completion activities.
• Commissioning, Operations and maintenance:
Calibration, inspection and maintenance of major field instruments including temperature
indicators and transmitters, control valves (I/Ps, positioners), pressure transmitters, regulators, gas detectors, PRV, level indicators, solenoid valves, pressure and temp. Gauges, recorders, SMART transmitters from handheld HART communicator, etc
• Ability to read and understand electrical & instrument specifications, P & ID’s, Single Line Diagram / technical data sheet and specification, DCS, ESD, F&G, control logic diagrams and other E & I technical documents.
Work Experience
Company: Al-Latifia Company Saudi Arabia (EPCM)
Position: Electrical Engineer
Period: 2006 – 2007
Duties:
• Troubleshoot, Servicing, repairing and maintenance of electrical and electronic related equipments through the coordination of maintenance teams.
• Compiles with constitutional and company policies, standards, and procedures in respect of health, quality, safety and environment.
• Give feedback to vendors and engineers to contribute to the non strop improvement of test procedures and manufactured equipments.
• ISO compliant at all times.
Work Experience
Company: Larson & Toubro ECC Division India (EPCM)
Position: Electrical Engineer
Period : 2004 – 2006
Duties:
• Electrical installations and inspection as per relevant drawing for installed cable ladder, tray, conduit, cable laying, glanding and termination works.
• Testing of installed lighting and power for commercial Buildings and plant.
• Trouble shooting all sorts of control wiring, and local control panels.
• Inspect motor control wiring as per drawing and Involve Motor Solo run testing.
• Involve Plant shutdown and maintenance activity for Electrical and Instrumentation works.
Skills Provision Limited | T: +44 (0) 2079890750 | E: enquiries@skills-provision.com | Registration Details
Copywriters | Privacy Policy | Data Protection Policy | Website Terms & Conditions | Business Terms & Conditions | Equality Policy | Modern Slavery Policy | Library | Sitemap