CV, Electronics Engineer Looking Worldwide

Available
Serial No: 39364
Skills keywords: 
Current location:  Pakistan - View on map
Nationality: PAKISTANI
Spoken languages: english

Qualifications

2005-2008 Bachelor of Electronics Engineering, MUET University. (Jamshoro, Pak)

2002-2004 Diploma of Associate Engg in Electronic, (SBTE, Karachi) Pak.

 

Organizational Experience

Organization: Dawlance PVT Ltd.
Duration: 29 June 2015 up to date.

Designation: Assistant Manager (Process Engineering)

Job Description: Process improvement, Machines automation, Routing, Cost & losses reduction of refrigerator and deep freezer production.

 Test and evaluate equipment performance at the plant.

 Designing, Implementation and automation of production machines.

 Design, program, simulate and test automated machinery and processes in order to complete exact required tasks.

 Carry out failure analysis for efficiency related issues to understand the root cause.

 Ensure Job Progression Chart and technical reports refer to carried-out activities.

 Maintain OEE (Overall Equipment Effectiveness), Availability, Performance and Quality.

 

Organization: Saudi Oger Ltd (King Khaled Intl Airport Project), Riyadh –KSA.
Duration: 07 Oct 2012 to 18 Feb 2015

Designation: Electronic Engineer (DDS & FLSS)

Project Description: SCADA (Monitoring & Control) based system including sub-systems DDS (Digital data system), BAS (Building Automation system), EWS (Emergency fuel shutoff system), AFL (Airfield Lightening control system-Dantel & DDS), Access control system/LSP (Local security panels), PSS (Power supervisory system) and FLSS (Fire & Life safety system). SCADA Server = HP DL380 G5

Responsibilities:

 Installation, Fault Diagnosis & error correction and maintenance of RTU Panels (Remote terminal unit).

 Troubleshooting the I/O controllers of National Instruments (CFP-2120, CFP-BPI xx, CFP-DI-xx, CFP-DO-xx, CFP-AI-xx, CFP-AO-xx, CFP-TC-xx, and CFP-RTD-xx) hardware.

 Reporting periodically to Maintenance QA; preparing work orders, PM and CM reports.

 Commissioning and fault maintenance of Access control system/LSP (Local security panels) includes cardex system and troubleshooting of communication between 2 pair Active/standby FT controllers and the security server.

 Operation, monitoring, control and troubleshooting of Airfield Lightening system (Dantel/DDS), maintenance and calibration of mismatches, error operation and command & feedback issues occur in VASI, touchdown, approach, approach flasher, Runway edge, Runway centerline, Aprons, beacons, Taxiways and directional lights.

 Installation, service and commissioning of Fire alarm panels (gamewell & Pytronics) and troubleshooting occur in actuating sub-systems (HVAC, Elevators, Security exit door and smoke ventilating system).

 Monitoring, operation & control of fuel pumps through 43 EFS points which are connected with DDS system.

 CM, QPM, PM and DR of all systems and panels (JRD, JBP, JLP, JMP, Net, Fire alarm panels,  wall clock) according to the given time schedule.

 

Organization: Karsaz Pvt Ltd
Duration: 23 Nov 2010 to 03 June 2012

Designation: Trainee Engineer

Project 1 Description: Karachi International Container Terminal, Karachi-Seaport. Maintenance and service of STS & RTG cranes spreader (ZPMC, RAM & Kalmar).

Responsibilities: Fault finding and maintenance of 20ft, 40ft & 45ft over/less spreading,

 Locking/unlocking and landing/holding problem.

 Installation and fitting of sensors, solenoid valves, electric motor, hydraulic pump, hydraulic cylinders and flippers.

 Troubleshooting of PLC system (Siemens simatic S7 300) and faults diagnosis.

 Programming PLC (Siemens simatic S7 300) by Ladder Diagram, and hardware troubleshooting.

 Maintenance and calibration of pneumatic control valves (Blackborough, Copes-Vulcan, Valtek, Masoneilan) and motorized valves (Auma matic & Auto tork).

 Strong background in motor defects, softstarters, drives, star/delta starters,

 Preventive maintenance and daily check list of spreaders.

 

Project 2 Description: IC-3 (Integrated container cargo terminal) Port Qasim, Karachi. Maintenance of Smith Detections X-Ray Inspection Mobile Cab 2000 & OCR (Optical character recognition).

Responsibilities:

 Calibration of X-Ray Inspection Mobile Cab 2000.

 Installation of X-ray tubes, detector cards, LIF cards, LEX cards.

 Troubleshooting, testing and adjusting voltages of power control box.

 Measurement of X-rays propagation by dose-meter.

 Maintenance of Cab-2000 power Generator.

 Designing, Implementing and Commissioning of new control loops as per modification requirements of client.

 Maintenance of OCR hardware and OCR software SeeGate2.

 Maintenance of color cameras and illuminations,

 Responsible for error free data transmission.

 Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM.

 

Organization: PCSIR Labs, (Pak council of scientific & industrial research-Hyderabad)
Duration: 02 Jan 2010 to 05 Aug 2010

Designation: Trainee-NIP

Project Description: Solar Energy Center.

Responsibilities:

 Worked on different projects of solar energy, conversion into other forms; i.e. Generation of electricity, Ddy processing & evaporation of humidity from grains, solar geyser and steam system.

 I designed, implemented and commissioned automatic control systems i-e solar lamp, Solar Car battery charger and Automatic water tank filling system.

 

Organization: NIMRA Cancer Hospital. (Nuclear institute of medicine & Radiotherapy Jamshoro).
Duration: 06 Aug 2009 to 01 Jan 2010

Designation: Trainee-NIP

Responsibilities:

 Worked in maintenance Lab of Electrical/ Electronic parts, circuits and pcb’s and repaired analog/ Digital circuits.

 Maintenance and service of Gamma camera, Linear Accelerator and other related medical instruments.

 

Training

 Internship in Novartis Pharmaceutical (Engg depart.)………………Jamshoro-Pak 2005.

 Water desalination technology, trainee, PCSIR 2010.

 Computer sciences, trainer … BISE HYD 2003.

 

IT Skills

 Operating systems : Windows XP, NT,7,8

 SCADA/RTU software : Lab view (National Instruments)

 Programs : MS Office Tools , Word pad

 Internet : Very good

 Programming languages : Micro controller (PIC & ATMEL) Programming.

 PLC Programming : Ladder Diagram (Logo soft, Simatic Step 7,Machine proficy, Melsec Medoc).

 Control Programs : Electronic workbench, Multisim.

 PC Networking : Very good

 

Transferrable Skills

 Effective Interpersonal communication skills.

 Excellent problem solving and analytic skills.

 Perform well under stress and tight schedules.

 

Professional Affiliations

 Pakistan Engineering council.

 Saudi Engineering Council (Under process).

 

Languages

 English: Fluent; read, write and speak

 Urdu: Mother tongue

 

References

Available on request






popup-img