CV, Experienced Pakistan Based Welding , Fabrication, Painting Inspect

Available

Serial No: 17696

Job Seeker Location

×

Close

Skills keywords: 

Current location:  Sindh, Pakistan - View on map

Nationality: Pakistan

Spoken languages: english

Qualifications

 B.Tech (Mechanical) from Indus Institute Of higher education, Karachi

 Passed D.A.E. (Mechanical) from P.B.T.E. Lahore

 Passed Matric in from B.I.S.E. Bahawalpur

Training/Skills

 CSWIP 3.1 Welding Inspector ( Cert # 46758 )

 BGAS CSWIP Painting Inspector 3/2 ( Cert # 93658 )

 Lead Auditor for ISO 9001:2008 from DAS Pakistan (Cert # IQ – LA 11558)

 Pressure Vessel Design Certification from NIDA Lahore (Cert # NA -1113-1690)

 Process piping Design, Layout and Stress Analysis from NIDA Lahore (Cert # NA -1113-1690)

 Project Management from NIDA Kaarachi (Cert # NB -1014-2204)

 Certified NDT Level II DPT As Per ASNT SNT-TC-1A Cert # 450/14

 Certified NDT Level II MPT As Per ASNT SNT-TC-1A Cert # 449/14

 Certified NDT Level II RT As Per ASNT SNT-TC-1A Cert # 448/14

 Certified NDT Level II UT As Per ASNT SNT-TC-1A Cert # 447/14

 Project Management Professional from 3D Educator Karachi (Cert # 3DPMP010/6/2005148)

 Protective Coating from 3D Educator Karachi (Cert # 3DPC010/0/2005152)

 Cathodic Protection from 3D Educator Karachi (Cert # 3DCP010/6/2005149)

 Certified as Quality Control Inspector from Descon Engg.

 Certification in Production Techniques from Descon Engg.

Quality Management System:

 Understand the application of Quality Management System (ISO 9001:2008).

 Awareness of Occupational Health & Safety (OHSAS 18001).

 Environmental issues (ISO 14001).

Career Summary

Experience: (above 17 years)

 I have worked since 25/04/2013 till 30/11/2014 as CSI (Coordinator, supervisor and Inspector)
in TUV Bureau Austria (MOODY) in UEPL (BP) in Khaskhaili Badin in Pakistan, Client UEPL (BP).

• Coordinator,Supervise and inspect the fabrication, welding and Painting and installation activities according to applicable standard and client procedures.

• Review of welding documents like weld map, NDT reports, weld history sheet and others inspection and testing reports.

• Inspection of material before fabrication and welding.

• Inspection of fabrication & welding of piping, pipe line and steel structures.

• Monitoring and inspection of plant piping,pipe lines, pressure vessel, wellhead piping, Jet pump and compressor lifting and shifting,Relocation “dismentling and installation” at site.

• Audit of Contractor’s Workshop and Construction Site.

• Pre welding, during welding and after welding inspection of weld joints as per ASME B31.3,ASME B31.4,ASME B31.8, API 1104, ASME Sec. IX and AWS D1.1

• Review the inspection record manual after completion of projects.

 I worked from 9/10/2011 to 5/12/2012 in Tekfen in Main Oil Line (CRC) and Tanks & Piping in Central Degasing station (CDS)
in FFD Asab in Abu Dhabi, Contractor Petrofac, Client ADCO.

 I have worked (1/10/2009 to 8/10/2011) as Welding and QA/QC Inspector Mechanical
in Tuwairqi Steel Mills Ltd. Bin Qasim. Karachi.

 Worked as Welding & Mech Inspector (21/8/2008 To 7/72009)
In JIACCO,Tuwairqi Steel Mill Ltd

 Worked as NDT Coordinator and Welding Inspector (8/5/2008 To 20/8/2008)
in JIACCO, Engro Vopak Tank

 Worked as QA/QC Insp & Welding Inspector & Welding Inspector (3/2/2008 To 29/4/2008)
in Mass Tech Engineering( Pvt) Ltd.Raw Water portable water & Reffluent pipe line work.ECPL.Descon Engineering (Pvt)Ltd.

 Worked as QA/QC Piping and welding Inspector (08/12/2007 To 3;/1/2008)
for Pipe Link Construction (Pvt)Ltd.SAWAN-II WELLHEAD Development Project,OMV Pakistan Ltd.

 Worked as QA/QC Piping and welding Inspector (4/9/2007 To 7/12/2007)
for  Pipe Link Construction (Pvt.)Ltd , Rehmet Gas Field, ENI & Petronas (Rehmat Gas field)

 Worked as QA/QC Piping and welding Inspector (20/11/2006 To 31/8/2007)
for Pipe Link Construction (Pvt.) Ltd ,SUL Compression Project Phase II,Pakistan Petroleum Ltd.

 Worked as QA/QC Piping and welding Inspector (5/8/2006 To 19/11/2006)
for Pipe Link Construction (Pvt.)Ltd , OMV Pakistan Oil & Gas Sawan (DBN),OMV Pakistan Oil & Gas Sawan

 Worked as NDT and Welding Inspector & Incharge Radiography team (18/4/2006 To 3/8/2006)
in JIACCO,Malakand III Hydral Power Project.AL-Triq(pvt)Ltd.

 Worked as QA/Qc & Piping inspector and welding Inspector (15/12/2005 To 15/4/2006)
,LPG Bullets,Vessel,Boiler tubes etc in different Engineering shops in Lahore,Jamal pipes Industries,Fast Tube,KBS Pumps

 Worked as NDT Inspector And Incharge Radiographic Team (4/5/2005 To 13/12/2005)
in JIACCO ,Pakistan Petroleum Ltd. Adhi,Pakistan Gas Field, Petroleum Limited

 Worked as NDT Inspector,QA & QC And Piping Inspector (15/6/2004 To 2/4/2005)
in JIACCO,LPG Bullets, Vessels,Boiler Tubes etc in Different Engineering Shops in Lahore,Jamal pipe Industries,fast Tube,KBS Pumps,Imran Engineering.(

 Worked as NDT Inspector,QA & QC And Piping Inspector (12/6/2003 To 11/6/2004)
in JIACCO,Unit V,IV ,Deewan Salman fiber Hattar

 Worked as QA & QC Inspector (5/9/2002 To 24/5/2003)
in JIACCO Pak Ltd,Project Ghazi Brotha Hydral Power Project.Voith & Siemens,Safec & Westepine (V Tech)China Power ,Baju,WAPDA.

 Worked as Quality Control Inspector (5/7/2001 To 18/8/2002)
in Data Steel Pipe Industry Sadiqabad.

 Worked as Quality Control Inspector (1/6/1997 To 31/5/2001)
in Descon Engineering,  Lahore.

 Worked as Quality Control Inspector (21/9/1996 To 30/5/1997)
in Data Steel Pipe Industry Sadiqabad manufacturing API 5L spiral welded pipe.

JOB RESPONSIBILITIES & WORK DONE :

TANK Farm:

• Inspection of Tanks fabrication and erection such like as Cone type, Heavy Slope, Hemi Spheroid, Spherical and Tanks as per API 620/650. DEP spec.

• Foundation and level check, Bottom plate’s laying inspection and material Traceability.

• Inspection of Shell plate’s erection vertical and horizontal joints, nozzles, stairs and plate form.

• Responsible for the inspection of Pre- and Post-welding.

• Preparation of weld maps (Bottom, Shell and Roof).

• Visual inspection of welding.

• Coordinate all NDT (RT, MT, PT and UT) according to API 650/620.

• Pneumatic Leak Test (PLT) of reinforcement pads.

• Peaking and banding inspection of Tank welds according to API 620/650.

• Plumb ness of Tanks.

• Responsible for the preparing of the QA/QC Format and Reports.

• Preparation of punch list pre-test and post-test

• Verification of punch list after rectification

• Preparation of Test Pack.

• Hydrotest witness

• Preparation of final Dossier.

Piping:

• Material traceability (Fitting, Pipe & Consumable Material).

• Responsible for the spool marking and welds marking.

• Inspection of Piping Pre-fabrication in workshop and erection at site according to client’s specification and Code B31.1, B31.3,B 31.4, B 31.8, DEP spec

• Checking of workmanship of Piping fabrication and erection.

• Responsible for the inspection of Pre- and Post-welding.

• Check Welding Procedure Specification (WPS) & Procedure Qualification Record (PQR).

• Witness of Welder Qualification Test (WQT) according to ASME IX.

• Control of welding material (Electrode, Filler Wire) backing of Low Hydrogen Electrode.

• Monitor welder performance and welding activities to ensure work is being carried out in accordance with the approved welding procedure.

• Visual inspection of welding Carbon Steel, Low Alloy Steel (P5, P9, P11, P22) and Stainless Steel, Nickel and Nickel Alloys,Monel.

• Fabrication & Welding inspection of Duplex material A 790.

• During Duplex welding consumables, Parameters, Purge control, preheating and Inter pass temperature control etc.

• Execute all NDT (PT, RT, MT, and UT) according to client’s specification and Codes.

• Inspection of Hydro test, Leak test, Pneumatic test, Flushing/Air blowing and Reinstatement.

• Preparation of Packages for commissioning.

• Interpretation of Radiographs film, witness of PT, MT according to ASME Code V, VIII & ANSI B31.1, B31.3. API 5L

• Inspection of Incoming Material According to Project spec.

• Make coil record which Load on SP Machine and put Heat # on each Pipe I.D

• Monitoring of SAW according to WPS

• Prepare Tensile Test piece according to 5L

• WQT conducting

• Work on Online UT machine

• Visual Inspection on primary stand

• Thickness monitoring of piping

• Real time X-Ray conducting

• Monitoring of End Bevel of Pipe

• Monitoring of Hydro Test

• Interpretation of End X-Ray

• Weigh Bridge Record Review

Cross-country Pipeline:

• Responsible for, Pipe receiving, Right Of Way (ROW), Survey for Stringing and bending.

• Responsible for the inspection of Pre- and Post-welding.

• Inspection of pipe as per API 5L.

• Visual inspection of welding according to API 1104.

• Execute all NDT according to Code (API 1104) and client’s specification.

• Inspection of Grit blasting and Heat Shrink Sleeve on weld joints.

• Inspection of Peal Test of Sleeve.

• Inspection of Trenching, Holiday Test, Lowering and Backfilling according to client’s spec.

• Preparation of as built of cross-country Pipeline.

• Preparation of final Dossier with all reports.

• Inspection of Hydro testing, Drying, Marker Post and Reinstatement according to client’s spec. & Code.

• Measurement of Pipe to Soil Potential.

• Maintenance of CP measuring & Marker Posts.

• Assembly and Erection

Vessel , Boiler, Heat Exchanger Fabrication:

• Preparation of Inspection and Testing Plan (ITP)

• Inspection of Vessels and Boiler fabrication according to ASME and TEMA and ITP

• Preparation Material Verification record

• Inspection of Marking and Cutting

• Inspection of Shell course rolling, circumferential and horizontal joints, nozzles.

• Responsible for the inspection of preparation of groove according to joint.

• Responsible for the inspection of Pre- and Post-welding.

• Preparation of weld maps.

• Visual inspection of welding.

• Execute NDT ( MT, PT ) according to ASME

• Interpretation of RT films

• Pneumatic Test of reinforcement pads.

• Hydro test

• Responsible for the preparing of the QA/QC Reports.

• Preparation of punch list pre-test and post-test

• Verification of punch list after rectification

• Preparation of final Dossier.

Structure:

• Inspection of structure fabrication in work shop and contractor work shop and Pre Assembly according to drawing and erection according to Key Plan and drawing and AWS D 1.1

• WQT according to AWS D 1.1

• Prepare material verification record

• Joint inspection according to drawing

• Inspection of pre-assembly of structure.

• Execute and Inspection of structure.

• Final inspectionin work shop and contractor work shop before dispatch to site according to dispatch list.

Non Destructive Testing:

• Co-ordination, meeting’s with client QC/NDT/Piping representative.

• Responsible for the providing assistance to site Management in answering all queries of the client relating to work.

• Interpretation and analyzing of the Radiographic Films.

• Performed Dye Penetrant Testing of different products.

• Performed the magnetic particle Testing.

• Thickness monitoring of piping, Vessels and Heat Exchangers.

• Hardness testing of different material.

• Control final documentation.

Surface preparation and Painting:

• Weather Condition monitoring according to Client spec

• Surface preparation according to SSPC SP 10,SP 2,SP 11 and Client spec, preparation inspection with profile gauge

• Paint preparation monitoring with agitator and application according to client spec

• Paint thickness inspection

• Painting inspection visually