Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

Electrical Engineer Power/Oil and Gas

I am currently available for work
Serial No: 6344
(17/08/1973, male)
List top 5 skills: construction, design, engineering, oil & gas, power, refinery, testing & commissioning
Qualifications and Skills:

BE in Electrical & Electronics

Previous Employment Details:

EXPERIENCE IN DETAIL :

Company : Power Construction Company, Trichy
Position : Lead Electrical Engineer
Projects & Description:  Working in a growing contracting company in Power, Industrial and Building Sectors Construction. I am performing in Project discussion, project planning, resource mobilization, manpower allocation, execution and field technical support.
 Deputational assignments in Drawings review, Asbuilt and Construction activities.
 Expertise in supervision and execution in Construction, Testing & Commissioning and Maintenance of the projects.

 Performed IFC drawing review, Supervision of Construction and Testing & Commissioning activities for:

 132/33 kV, 1X20/25 MVA Hvpnl substation Kairu (Bhiwani)
 132/33 kV, 2X20/25 MVA Hvpnl substation Pali (Gurgaon)

Company : Qatar Kentz WLL, Qatar
Position : Discipline Electrical & Power Engineer

Projects & Description:

Project 1-Feasibility study and Conceptual report for New Transformer upgrading in
Offshore Platform Station-2, Qatar Petroleum,Qatar.
Project 2-Feasibility study and Conceptual report for New Energy Meters Installation at
Halul Island, Qatar Petroleum, Qatar.
Project 3-Prepared As-built drawing for LNG Camp Projects, PNG LNG, Australia.
Project 4 -Prepared As-built drawing for LNG Camp Projects, Borrow Island, Australia.

Preparation of Data Sheets, Material Requisition & Purchase Requisition for:
LV & MV Switchgear, LV & MV Cables, Lightings, Lighting Junction Boxes & Lighting Fixtures & Power Transformer, Earthing Cables & rods.
Vendor documents review and Technical Bid Evaluation, -Site technical query

Company : Alaa International Contracting Company, KSA.
Position : Sr.Electrical Engineer
Project : Replace of Auxiliary Control System in Tank Farm Area
Client : Aramco Yanbu Refinery, Yanbu
Description :
• Preparation of Data Sheets, Material Requisition and Purchase Requisition for:
 LV Switchgear, Power Panels & Switch Rack’s, LV Cables,
 Lightings, Lighting Fixtures, Lighting Junction Boxes, Conduits & accessories,
 Power Transformer, Earthing Cables and Cable rods in compliance with Standards.
 IFC Design review and modifications, Hazardous area classification,
 Reviewed Vendor documents in compliance with standards and specifications
 Equipments and Material’s selection in compliance with Hazards area classification
 Identification of installation locality for Power Panel’s & Switch Rack’s in Tank Farm area in compliance with Standards, -Panels & Cable entry locations in the buildings
 Cable Trench and Cable Tray’s route marking/excavation
 Conduit’s route marking/Fixing, Cable Tray Fixing & Cable Laying
 Grounding Grid Trench excavation / cable laying & Thermo welding interconnection
 PMT day to day Coordination, - Vendor Coordination
 Technical Query clearance/design modification, -MTO preparation
 Resource planning/Monitoring for smooth and timely execution of the project.
 Attended weekly progress review meeting with Clients.

Current location: 

Tamil Nadu, India - View on map

Nationality: 

indian

Preferred Sector of Employment: 

Oil, Gas and Energy

Spoken languages: 

english, Hindi, Tamil

Locations I am interested in working:

Anywhere



EXPERIENCE IN DETAIL:

Company : Qatar Kentz WLL, Qatar

Position : Discipline Electrical Engineer

Projects : – Feasibility study/Conceptual report of new transformers

Upgrading at offshore platform -2 for Qatar Petroleum, Qatar.

– Feasibility study/Conceptual report of new energy meters

Installation at Halul Island for Qatar Petroleum, Qatar.

– Vendor documents review, Site technical query clearance, MR

Preparation, TBE, Drawing As built for PNG LNG & Borrow

Island Camp Projects, Australia.

Company : Alaa International Contracting Company, KSA.

Position : Sr.Electrical Engineer

Project : Replace of Auxiliary Control System

Client : Aramco Yanbu Refinery, Yanbu

 

Description : IFC Drawings review and modifications, MTO’s review and

Modifications, Material’s Selection as per project requirements,

Vendor documents review as per specifications, Vendor

Coordination, Cable Trench & Cable Tray route marking/excavation,

Technical Query clearance, Cable Laying, Cable Tray Fixing,

Grounding Grid Laying & interconnection, PIB/SIH Building’s

Cable entries & Panel Locations, PMC Coordination, Power

Panel’s & Switch Rack’s location Identification & markings as per

STD’s, Schematic /control and logic diagram reviewal.

 

Company : Gulf Spic General Trading & Contracting Co. W.L.L, Kuwait.

Position : Lead Electrical Engineer

Project : New Flare gas recovery unit (New FGR UNIT-105)

Client : Mina Al-Ahmadi Refinery,

Kuwait National Petroleum Company, Kuwait

Description : Material’s Selection as per project requirements, Vendor

Documents review as per specifications & Vendor

Coordination, sizing calculations review, Technical Query &

Comments updation, Cable Trench & Cable Tray route

marking, Technical Query clearance, Cable Laying,

Cable Tray Fixing, Site survey for data collection and

Engineering Coordination.IFC Drawings review and

modifications, MTO’s review and modifications, Cable

routing and connections to MOV’S & EIV’S.

 

Company : ABS Consulting, Chennai.

Position : Electrical Engineer

Project : GSPC Deen Dayal Field Re-feed

Client : Gujarat State Petroleum Corp. (GSPC)

Description : Final document’s review and consultancy of Electrical

drawings and Technical Query clearance for offshore

Wellhead platform Development project.

 

Company : Brunel Oil & Gas Services, Qatar.

Position : Sr.Electrical Engineer

Project : Sweet Fuel Gas Supply to Dukhan Consumers, Qatar

Client : Qatar Petroleum, Qatar.

Description : – Performed engineering activities and design coordination in

Existing Valve/Compressor stations involved with power

supply to – Area lighting & Glycol heater,

– Earthing connection,

– Cable Sizing & Earthing Sizing calculation.

– UPS sourcing to LV Panel board.

– 33kV cable routing design between two stations,

– Method statement preparation and its modification,

– Site facilities Development,

– Design review,

– Site coordination.

 

Company : Mitsubishi Electric Corporation, Vietnam

Position : Assistant Commissioning Supervisor

Project : 330MW Thermal Power Plant, Vietnam.

Client : Electricity of Vietnam

Description : – Commissioning of Generator shorted turn analyzer using

GENTECH Software.

Assistance to Testing & Commissioning of

– Gen. Temperature rise test.

– Measurement of generator vibration.

– OEL/UEL Test at 25%, 50%, 100% loads.

– System stability test (PSS) using HICODER kit.

– Seal oil water separator monitor & control.

– Hydrogen gas pressure monitor & control.

– M3245-Gen.protection, M3311/M3310-T/F protection.

– Control room Operations Training to Client Operators and

Maintenance team.

– Operations and Maintenance training to client in Beckwith

Electric relays-Model No. : M3425 (Gen.), M3110, M3111 (T/F).

 

Company : TR Engineering LLC, Muscat, Oman

Position : Electrical Engineer

Project : Detailed Engineering in Oil and Gas Project

Client : Occidental Mukhaizna llc, Oman

Description : Cable Routing between Main S/S to two Satellite S/S’s (total

18kms) – Study of the project,

– Site Visit for Data collection,

– MTO Preparation, Detail Engineering of Cable Trays &

Trenches for Cable Routing,

– Comments updation,

– Site Coordination and drawing Modification at site,

– Technical Query Clearance at site.

Cable sizing calculation, Earthling calculation

– Vendor coordination’s

 

Client : Petroleum Development of Oman, Oman.

Project : Engineering in power supply to additional MSV and MPFM.

– Qaharir Field development.

– Marmul Infield development.

– Interlink reverse compressor Project Vendor document review

for LV MCC. Review of MCC Drawings, Cable sizing calculation.

 

Company : Aljazira Engineers and Consultant, Al khobar, K.S.A.

Position : Design Engineer

Project : 132/13.8Kv GIS Substation (Spare Bays) Renovation Project

Client : Al-Osais Construction Co., Dammam

Description : – Review of Single Line Diagram,

– Review of Interlocking Schemes.

– CT/VT, Cable Sizing Calculation.

– Comments updation.

– Review of Relay Setting Calculation.

– Preparatory of Remote End Substations Single Line Diagram

(Spare bays converted to feeders),

– Equipment Layout and Protection Logic Diagram.

– Site Visit for data collections.

Knowledge in SLD preparation and Sizing of Battery & Battery

Charger.

 

Company : Siemens LLC. Abu Dhabi.

Position : Design Engineer

Project : Distribution Management System (DMS)

Client : Abu Dhabi Water and Electricity Authority (ADWEA), Abu Dhabi.

Description : DMSAs built design of 33/11kV Primary Substations:

– Sports city Primary S/S

– North Hilton Primary S/S

– Manaseer Primary S/S

– Scehalmia Primary S/S

– Airport Primary S/S

 

Company : Caporral & Morreti LLC. Abu Dhabi.

Position : Testing Engineer

Project : Distribution Management System (DMS)

Client : Abu Dhabi Water and Electricity Authority (ADWEA), Abudhabi.

Description : – In a live substation, Locating the space availability for

mounting of Control relays, Decoupling relays, terminal Blocks,

Cable Trays as Preparatory works.

– Adaptation of relaying, metering and signaling as per the

scheme Requirements.

– Commissioning by Short Shutdown.

– Extending the signals of controls, metering and annunciation to

Main Distribution Frame Panel.

 

Company : Hitech Engineering Services, Chennai.

Position : Senior Testing & Commissioning Engineer

Project : Testing and Commissioning, Asbuilting, Reviewing

Description : Testing and commissioning of substation Equipment’s like:

– CT, – CVT

– Circuit Breaker

– Disconnector/Isolator

– Surge Arrestor

– Transformer (Up to 100MVA)

– Cable Schedule Checking

– Control Scheme checking & Execution

– Protection Scheme checking & Execution

– Interlock Scheme checking & Execution

– Co-ordination for Distance and Bus bar relays testing

& commissioning.

– Knowledge in High Potential testing.

– Knowledge in REF and Differential schemes.

 

Company : Voltech Engineers Pvt.Ltd, Chennai.

Project : Principle activities in Testing and commissioning, Control/Monitor

& Scheme logic execution, as-builting, Documents reviewing of all

Substation and Construction coordination.

 

Description of few of the Major Projects:

– 220kV S/S in Petronet LNG Ltd, Gujarat. Duration: 10Months.

Project activities in EHV, HV, MV, and LV Equipment’s testing &

Commissioning.

– 220kVS/S Birla Copper, Dahej

– 132kv S/S in HVPNL, Haryana, India

– 220kv S/S in HVPNL, Haryana, India

– 132kv S/S in KPTCL, Bangalore, India.

– 33kv s/s for GED, Ponda, GOA.

– 6.6kV, 11kV SWGR in TISCO Project Site, Bokaro, Jharkhand.

 

Company : M.A.M College Of Engineering, Trichy.

Position : Lecturer

Project : Teaching of engineering subjects and provided Laboratory

Practical Training.

 

Educational Qualification :

Bachelor of Engineering in Electrical and Electronics

Completion year : June, 1996

University : Annamalai University, Chidambaram

Software known : AutoCAD, MS Office professionals, MS Windows,

ETAP (Basic knowledge) and MICOM S1 Studio