Review Design, Bid Tender, Procurement, Project Management, Inspection, Construction and Commissioning is the area of my experience.
Qualifications & Certifications
• BACHELOR DEGREE IN ELECTRICAL Engineering (MYS)
• WESTERN AUSTRALIA REGISTERED ELECTRICIAN (A GRADE)
• WORKING AT HEIGHTS (Safe Right WA – AUSTRALIA)
• CONFINED SPACE (Safe Right WA – AUSTRALIA)
• SENIOR FIRST AID (St John WA – AUSTRALIA)
• EEHA INSTALLATION, INSPECTION & MAINTENANCE (AUSTRALIA)
• HV SWITCHING TICKET (AUSTRALIA)
• NTC-3 ELECTRONICS SERVICING (S’PORE)
• NTC-2 & 3 ELECTRICAL INSTALLATION & SERVICING (S’PORE)
• CONTRACT MANAGEMENT STAGE-2 (NZ)
• CONTRACT LAW STAGE-2 (NZ)
• HEALTH AND SAFETY CERTIFICATE (NZ)
• CSWIP 3.0- VISUAL INSPECTION (UK)
• TRAFFIC CONTROLLER L1 TRANSIT (NZ)
• NEW ZEALAND REGISTERED ELECTRICIAN (UNLIMITED LICENSE)
NEWCREST MINING LIMITED AUSTRALIA
RESOURCE:- Graduate Engineers, Vendors and Contractors
August 2014 – Current
PROJECT: ROY HILL
Senior Construction & Commissioning Electrical Project Engineer
RESOURCE:- Vendors and Contractors
April 2014 – July 2014
LEIGHTON OFFSHORE PTE LTD DUBAI
IRAQ CRUDE OIL EXPORT EXPANSION
PROJECT PHASE 1 Lead E&I Project Engineer
RESOURCE:- 2 E&I Superintendents, 3 Supervisors, 3 QC Engineers, 61 E&I Technicians, Vendors and Contractors
August 2013-December 2013
FORGE GROUP POWER AUSTRALIA
WAPS POWER STATION (WEST ANGELAS, WA) Gas Turbines – GE (LM6000 PF) Senior E&I Project Engineer
RESOURCE:- 1 Electrical Engineer, 2 Supervisors, 1 Leading Hand, 41 Electricians & Trade Assistant, Vendors and Contractors
March 2013-August 2013
LEIGHTON CONTRACTORS AUSTRALIA MUMBIDA WIND FARM – VERVE (GERALDTON, WA) Wind Turbines – GE (22 WTG – 55MW) Project Engineer (Permanent)
RESOURCE:- 2 Graduate Engineer, 2 Supervisors, 1 Leading Hand, 25 Electricians & Trade Assistant, Vendors and Contractors
August 2011- December 2012
LEIGHTON CONTRACTORS AUSTRALIA CIPS Unit 8&9 – POWER&WATER (Channel Island–Darwin, NT) Gas Turbines – Rolls Royce (GT – 45MW) Electrical Engineer (Permanent)
RESOURCE:- 1 Supervisor, 5 Leading Hand, 38 Electricians & Trade Assistant, Vendors and Contractors
August 2010- July 2011
GE AERO – NRG (Global RECRUITMENT SERVICES LTD) AUSTRALIA Cazenga (Angola – Africa) Gas Turbines – Inetec (GT – 19.2MW) Electrical Engineer (Contract)
RESOURCE:- 1 Service Engineer, 2 Operators and Contractors
May 2010-June 2010
BILFINGER BERGER SERVICES AUSTRALIA BHP Billiton Iron Ore-Mt Whaleback (Newman) Electrical Manager (Contract) RESOURCE:- 1 Supervisor, 15 Electricians, Contractors and Vendors
November 2009-March 2010
BILFINGER BERGER SERVICES AUSTRALIA Neerabup 330MW Open-Cycle Gas Fired Power Station Senior Electrical & Instrumentation Engineer (Contract)
RESOURCE:- 3 Supervisors, 5 Technicians, Contractors and Vendors
March 2009-June 2009
SCHNEIDER ELECTRIC AUSTRALIA PTY LTD
Gold Mine (BGM) – Newmont Asia Pacific Senior Commissioning Engineer (Contract)
RESOURCE:- 5 Engineers, 5 Supervisors, 68 Electricians, Contractors and Vendors
March 2008-March 2009
McCAIN FOODS NEW ZEALAND McCain Foods Limited – New Zealand Industrial Electrician
RESOURCE:- Contractors and Vendors
December 2006-March 2008
TRANSFIELD SERVICES E&T NEW ZEALAND Whirinaki Power Station 155MW (Pratt & Whitney) Unison Networks
Genesis Hydro Electric Power Station Tuai – 3x20MW units Piripaua – 2x21MW units
Kaitawa – 2x18MW units Engineering Officer
RESOURCE:- 4 Supervisors, Project Manager, Senior Engineering Officer, Technicians, Contractors and Vendors
January 2004-December 2006
BROADSPECTRUM SINGAPORE FPSO Barracuda & Cartinga Field Development Vessel Conversion (Petrobras Brazil) – Singapore
Japan Vietnam Petroleum Company Platform – Batam, Indonesia
Electrical & Instrumentation Supervisor (Contract):- 14 Technicians, Contractors and Vendors
March 2003-November 2003
KENSTEEL GROUP SINGAPORE FPSO Conoco Belanak (Conoco Phillips & KBR) – Singapore and Indonesia FPSO Bijipura Salema (Modec International and Shell) – Singapore Construction & Commissioning Engineer (Contract)
RESOURCE:- 5 Engineers, 3 Supervisors, 35 Technicians, Contractors and Vendors
September 2001-February 2003
TOTAL AUTOMATION SINGAPORE White Tiger Platform (Vietsov Petro) -Singapore
Balal Drilling Platform
(Total Fina Elf) – Singapore
FPSO Falcon – Singapore (SBM)
E&I Commissioning Engineer (Contract)
RESOURCE:- 2 Supervisors, 16 Technicians, Contractors and Vendor
February 1996-May 2001
SEMBAWANG GROUP SINGAPORE Sembawang
Shipyard Technical Officer
January 1991-December 1995
The Wind Turbines, Gas Turbines, Mining and Oil & Gas Projects Design, Construction and Commissioning consists of:-
Review Electrical & Instrumentation specifications and drawings from Design Consultant and Vendors.
Participate in Hazard and Operability Analysis (HAZOP) workshop during design phase.
Participate in Hazard Identification (HAZID) workshop during design phase.
Review Design, Inspect and prepare EEHA dossiers for various plants within site.
Be part of HSE team to minimize incidents and keeping projects to Zero LTI’s.
Generate new Inspection and Test Plan (ITP), Procedure and Test Sheets for the entire Project (16 Switch rooms – High Voltage & Low Voltage).
Update project progress schedule as per requirement of project’s.
Generate cable interconnection diagrams and conduit layout for above and below ground works
Generate HV termination kits, LV cable and HV/LV gland spread sheet for procurement.
Generate and compile I/O list for SCADA system from various vendor’s, client and subcontractors
Prepare RFQ for all Electrical, Instrumentation including Switch room.
Prepare detailed evaluation spreadsheet for all Electrical, Instrumentation including Switch room Vendor’s.
Site visit to overseas plant for various types of electrical and control cables.
Review and Award Contract’s to various Vendors and Contractors for all Electrical, Instrumentation including Switch rooms.
Mentor graduate Engineer’s.
Bid Tenders for BHP Billiton and Subcontractors on existing plant upgrade works.
Procure 132/33/22/11/3.3kV/LV equipment’s from local and overseas suppliers.
Witness FAT on various Electrical, Instrumentation systems including switch rooms.
Visual Inspection of Electrical and Instrumentation equipment delivered for the Project’s.
Generate and control electrical forecast.
Coordinate with client and design consultant on all issues and project deliverables.
Organise and manage routine meeting with client, vendors and subcontractors.
Prepare manning spread sheet and organise progress meeting between client and subcontractors.
Raise RFI, RFD and RFA on project related matters.
QA all drawings and documents completed on site by in house crew, vendors and subcontractors.
Red line mark ups of construction drawings.
Review and comment Electrical and Instrumentation ITP’s, ITC’s and Procedure’s from Vendors and Subcontractors.
Inspection of Electrical & Instrumentation devices and equipment installed on site.
Supervise and coordinate the installation of 132/33/22/11/3.3kV/LV equipment’s, HV/LV cables and SCADA systems
Supervise and coordinate the commissioning of 132/33/22/11/3.3kV/LV equipment’s,
HV/LV cables and SCADA systems
Supervise in house personnel and subcontractors on site.
Supervise installation and pre-commission of HV power cables.
Supervise installation of cable ladder and cable tray.
Supervise installation and of Hazardous Area equipment’s
Guide and advice subcontractor during construction and commissioning stage
Prepare work pack for crew and contractors.
Maintenance of 220/110kV Substation for Transpower New Zealand
Maintenance of Electrical equipment’s, Dry Docks, Floating Docks, Pendant Control Crane, Dockside Cranes and Super Tankers.
Calibration of Mechanical and Electronic Protection Relays.
Overhaul and testing of AC & DC Motors and Generators.
Electrical & Instrumentation product experience:-
220/110/33/22/11/6.6kV Power Transformers
33/22/11/6.6kV Distribution Transformers
220/132/110kV GIS Circuit Breakers
220/110/33/22/11/6.6kV Disconnectors & Earth Switch
HV/MV/LV/ELV (Power, Control, Instrument & Communication)
132/33/22/11kV Instrument Transformers (CT, VT & Combined CTVT)
132/33 Post Insulators and Busbars (Switchyard)
33kV GIS and AIS Switchboard
22kV AIS Switchboard
11kV AIS Switchboard
6.6 AIS Switchboard (Alstom)
HV/MV/LV Protection Relays
LV MCC (ACB & Starter type)
DC Battery Chargers
AC & DC Distribution Board
Instruments (PT, TT, FT, LT, PS, LS)
Small Light and Power
Earthing & Lightning
AC & DC Motors
Gas and Diesel Turbines
Cranes (Dockside, Pendant and Tower)
Docks (Dry and Floating)
Hazardous Area (Junction Boxes, IS Relay, Cable Gland and etc…)
1. Nominated for “Emerging Potential Award” by Leighton Contractors for the year of 2011
Before you fill out our registration form, we feel it necessary to pass on some important information.
After completing our registration process your details are checked over by our Validation Team. Their task is to upload suitable submissions or delete.
Registrations that pass validation automatically produce an online CV Profile. Due to the popularity of our website profiles are widely seen by prospective employers. On a daily basis we receive many Profile enquiries.
By following our guidelines your profile will pass our validation process.
Key points to note
Your aim should be to produce a fantastic online CV Profile.
Our task is to find you meaningful employment.