Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Senior Mechanical and Commissioning Engineer looking worldwide

I am currently available for work
Serial No: 16194

List top 5 skills: commissioning, mechanical engineering
Short Bio:

OSAMA ABDOU
Rijswijk, the Netherlands
Mobile: +316 5148 5620
E-mail: orrkado2003@yahoo.com

I have served as “Sr. Mechanical Commissioning Engineer" in Oil/Gas and Petrochemical Companies for more than 22 years Experience. I have Bsc. of Mechanical Engineering from Cairo University, Egypt on 1990. I've a strong experience in the Installation, pre-commissioning, Commissioning, start up and FAT of Rotating and Static Equipment of OIL/GAS,LNG and petrochemical companies.

Current location: 

Zuid-Holland, Netherlands - View on map

Nationality: 

EGYPTIAN

Preferred Sector of Employment: 

Oil, Gas and Energy

Spoken languages: 

Arabic, english, french

Locations I am interested in working:

Anywhere



EDUCATION

1985 – 1990: University: Cairo University, Faculty of Engineering, Egypt

Degree obtained: Bsc.of Mechanical Engineering.

GPA: V.Good (3.2/4)

EMPLOYMENT

Aug.2013 : Present: Sr.Mechanical Commissioning Engineer, FPSO, EPC for BP Co., ANGOLA Feb.2012 : July2013: Sr. Rotating Commissioning Engineer , Off/On shore, SHELL Co., NIGERIA

Nov.2008 : Dec.2011: Mechanical Commissioning Consultant , LNG plant, TOTAL Co., YEMEN

Sept.2000 : Sept.2008: Mechanical Commissioning Engineer, PETROCHEM.CO.,QATAR

June1992 : Aug.2000: Sr. Mechanical Engineer, Off/On Shore, GUPCO/AMOCO , EGYPT

AUG.2013: PRESENT: SR. MECHANICAL COMMISSIONING ENGINEER, FPSO ,EPC for BP Co., ANGOLA

1- Ensure that all Rotating Equipment and associated systems are correctly hooked up with appropriate Constructions

punch list items. Supervise and monitor installation, pre-commissioning, commissioning, FAT and SAT of the Rotating

and Static equipment and systems through EPC Contractor. Update CMS (ICAPS), OPERCOM database accordingly,

and ensure that all Carried out commissioning activities meet the project Requirements and Company Standards.

2- Provide oversight and coordination of Installation and inspection services for major Rotating and Static Equipment

during pre-commissioning, commissioning and Start up as:

• Centrifugal Compressor (Novo-Pignone), Gas Turbine (GE, F-5).

• Reciprocating AIR &GAS Compressors (DR,ARIEL) driven by Gas Engines and Electric Motor.

• All types of API&ISO Pumps, Compressor load and performance test run.

• Diesel Generators and associated Equipment

• Equipment package skid leveling and soft foot check.

• Cold alignment (without and with piping).

• Lube oil and hydraulic starter lines flushing.

• Piping system pre-commissioning work as flushing/cleaning, Hydro-testing and P&ID line walk.

3- Co-ordinate between Commissioning Contractors and the Company teams, providing feedback on progress to update

Plans, costs and schedules. Monitor the HSE performance of all commissioning contractors in the area and to ensure

That all Work sites are operating safely.

4- Review and provide inputs to contractor pre-commissioning, commissioning and RFSU execution plans, Resources

Allocation, test procedures and final documentation. Ensure that all Plant Equipment and associated systems are

Correctly installed with appropriate construction Punch list items. Follow up CMS database progress and verify

Punch lists clearance by the Contractors.

5- Supervise Receiving, Inspection, Testing and proper preservation of commissioning materials and Equipment

And Ensure that they are in accordance with the contract prior to Receipt and acceptance. Co-ordination between

Commissioning Contractors and the Company teams, providing Feedback on progress to update plans and Costs.

6- Review specifications, prepare technical bid evaluations, review vendor drawings and data and Supervise other

To do the same. Review marked-up as built drawings of the completed Construction before commissioning and

Handover to Operations. Highlight any deviations from the original design to the Construction Team.

7- Participate in HAZOP / HAZID analysis, Conduct Job Safety Analysis, audit and develop PTW systems during SIMOPS

And Start up stages and Ensure works are done in accordance with the specified work scope, Safety roles and PPE

Requirements and enforce the implementation of the Company’s Health policy.

FEB.2012 : JULY2013: SR.ROTATING COMMISSIONING ENGINEER ,OFF/ON SHORE, SHELL CO., NIGERIA

1- Supervise and monitor Installation, Pre-commissioning, Commissioning, FAT and SAT of the Rotating and Static

Equipment and associated systems and sub-systems. Update CMS (QEDI) database accordingly and ensure that

All Commissioning activities carried out meet the project Requirements and SHELL Company standard(DEP).

2- Supervise and monitor pre-commissioning, commissioning, FAT and SAT of the mechanical rotating Equipment

And Systems through EPC Contractor. Update CMS (QEDI)database accordingly for the following:

• Reciprocating Air & Gas compressors from Dresser Rand & ARIEL .

• Centrifugal Compressor (Novo Pognon) and GE Gas Turbine fram-5.

• API &ISO Pumps and Compressors Load /performance test run.

• Diesel Generators and associated Equipment.

• Lube oil and hydraulic starter lines flushing.

• Piping system Flushing, Cleaning, Hydrotest and reinstatement leak test.

3- Supervise Receiving, inspection and testing of commissioning materials and Equipment and ensure that they are in

Accordance with the contract prior to Receipt and acceptance. Provide technical Input into Commissioning work

Packs within discipline, monitor the quality Performance of contractors and subcontractors. Ensure appropriate Lifting

Plans are prepared and approved prior to commencement of all major Critical lifting operations.

4- Co-ordinate between Commissioning Contractors and the Company teams, providing feedback on progress to update

Plans, costs and schedules. Monitor the HSE performance of all commissioning contractors in the area and to ensure

That all Work sites are operating safely.

5- Participate in HAZOP / HAZID analysis, Conduct Job Safety Analysis, audit and develop PTW systems during SIMOPS

and Start up stages and Ensure works are done in accordance with the specified work scope, Safety roles and PPE

Requirements and enforce the implementation of the Company’s Health policy.

6- Prepare training programs for National Employees undergoing on-the-job training by Identifying specific training needs.

Provide essential training and guidance to trainees, develop and other subordinates with a clear objective of career

Development.

NOV.2008 : DEC.2011: MECHANICAL COMMISSIONING CONSULTANT , LNG Plant, TOTAL Co., YEMEN

1- Supervise and monitor installation, pre-commissioning, commissioning, RFSU and SIMOPS of the Rotating

and Static equipment/systems through EPC Contractor. Update CMS (ICAPS) database accordingly and

Ensure that all commissioning activities carried out by the contractors meet the project Requirements and

Company Standard Engineering Procedures.

2- Review and provide inputs to contractor pre-commissioning, commissioning and RFSU execution plans, Resources

Allocation, test procedures and final documentation. Ensure that all Plant Equipment and associated systems are

Correctly hooked up with appropriate construction Punch list items. Follow up ICAPS database progress and verify

punch lists clearance by Contractor.

3- Co-ordination between Commissioning Contractors and the Company team, update plans, costs and. Monitor HSE

Performance of all commissioning contractors in the area and to ensure that all sites are operating safely.

Review specifications, prepare technical bid evaluations, review vendor drawings and data and Supervise other

To do the same. Review marked-up as built drawings of the completed Construction Before commissioning and

Handover to Operations and Highlight any deviations from the original Design to the Construction Team.

4- Provide oversight and coordination of Installation and inspection services for major Rotating Equipment during

Turnarounds, pre-commissioning and commissioning as:

• Centrifugal Compressor (Novo-Pignone),Gas Turbine(GE, F-5),Turbo-Expander(Roto flow) and Blowers.

• Reciprocating Gas compressor from ARIEL, D-R driven by Gas Engines and Electric Motors.

• API&ISO Pumps, Compressor load and performance test run.

• Diesel Generators and associated Equipment

• Equipment package skid leveling and soft foot check.

• Cold alignment (without and with piping).

• Piping system pre-commissioning work as flushing/cleaning,

• Hydro-testing, P&ID line walk, reinstatement leak test.

5- Participate in HAZOP / HAZID analysis, Conduct Job Safety Analysis, audit and develop PTW systems during Start up

stages and Ensure works are done in accordance with the specified work scope, Safety roles and PPE requirements

and enforce the implementation of the Company’s Health policy.

SEPT.2000 :SEPT.2008: MECHANICAL COMMISSIONING ENGINEER, PETROCHEMICAL CO., QATAR

1- Review and comment on detailed pre-commissioning plans as required, Supervise all Start-up and initial operation

Of equipment until systems/equipment are turned over from commissioning to operations care and custody.

Monitor the installation progress against the schedule and ensure that any required Commissioning Activities are

Planned and scheduled appropriately in a safe manner and Within the budget . Study/review supplied engineering

Drawings; and recommend to Supervisor appropriate corrective measures.

2- Review the drawings of the completed construction before commissioning and handover to Operations, Highlight

Any deviations from the original design to the Head of Construction. Provide technical Input Into commissioning work

Packs within discipline, Feedback from team members and quality of Commissioning work packs and Validate punch list

Items, follow up OPERCOM database progress and Verify punch list clearance management by Contractor.

3- Perform other related duties such as initiating/originating stores requisitions and purchase orders, Writing technical

Reports, Hand-over Notes, maintaining daily logs and work records and familiar with the international standards

Including API, ASME.

4- Hands-on responsibility of the Installation of mechanical failures Investigation and maintenance Problems root

Causes of Rotating /static Equipment of:

• Centrifugal Gas Compressors: Nouvo Pignone, up to 132000Kg/Hr & 750Kw.

• Gear Integrated Centrifugal Air Compressor: Atlas Copco up to 6500m3/Hr& 9740Kw.

• Gas Turbines (GE,F-5) , all types of API and ISO pumps..

• Reciprocating Compressors: BURCKARDHT/SULZER, Dresser Rand.

• Screw compressor &Turbo expanders: Atlas Copco (Roto Flow).

• Blowers, Vessel reactor, Tube reactor, Extrusion/PSV/Control valves, Gas coolers, Heat exchangers.

5- Prepare the annual budget(OPEX,CAPEX)) for the Operations and Maintenance department. Review staff, equipment

And supply needs and planned activities, monitor expenditures after budget adoption; approve purchase requisitions

And develop department Objectives and targets to achieve the Division’s KPI.

6- Implement HSE policies, procedures, Risk assessments, job safety analysis,encourage safety culture, Insure that

Safety meetings are performed timely, documented and reported. Audit and develop PTW Systems during and

Ensure works are done in accordance with the specified work scope, safety roles and PPE requirements.

JUNE1992: AUG.2000: SR. MECHANICAL ENGINEER, OFF/ON SHORE, GUPCO/AMOCO Co., EGYPT

1- Review modifications and installation of new equipment, determine requirements, and supervise the preparation

Of preliminary specifications and drawings. Supervise new project commissioning and punch listing, and follow up

With the Projects Division clearance of the punch list items. Liaise with Operations and Asset Teams to coordinate

Inter-discipline work activities and Maintenance activities.

2- Review commissioning Strategies and Plans and introduce changes as and when Necessary to meet project goals

And objectives. Oversee the functioning of the PMC to ensure that all commissioning activities carried out by the

Contractors meet the project requirements, Company Standard Engineering Procedures. Review and approve

Requirements for major Modifications and determine work priorities with concerned personnel.

3- Familiar and have hands-on experience on static equipment turbo-machinery package and Rotating Equipment

And associated systems pre-commissioning work such as:

– Equipment package skid leveling and soft foot check.

– Cold alignment (without and with piping).

– Lube oil and hydraulic starter lines flushing.

– Turbo-machinery associated systems testing.

– Pump/compressor load /performance test run.

– Familiar with piping system pre-commissioning work as flushing and Hydro-testing.

4- Prepare and implement detailed maintenance work procedures and practices for all sections activities and acquainted

With planning & scheduling packages (CMMS)MAXIMO & Ms. Project for major maintenance and Overhaul projects.

Ensure strict adherence to approved Quality Plans and commissioning procedures and monitoring the quality

Performance of contractors and subcontractors, ensure appropriate lifting plans are prepared and approved prior

To commencement of all major critical lifting operations.

5- Prepare the annual budget(OPEX,CAPEX)) for the Operations and Maintenance department. Review staff, equipment

and supply needs and planned activities, monitor expenditures after budget adoption; approve purchase requisitions

and develop department Objectives and targets to achieve the Division’s KPI.

6- Support the HSE Manager for the aspects falling within the area of responsibility and the preparation of the general

HSE Plans. Promote and ensure the application of the HSE Manual far the activities falling into my Responsibility.

Approve work permits In Commissioning Controlled Areas.

AWARDS OBTAINED

-Technical training in FISHER instruments controller, USA.

– Mechanical Seal Maintenance in John Crane, USA

-Advanced Maintenance of the multistage Pumps, IDP Co., USA

-Centrifugal Compressors: Nouvo Pignone (ITALY).

-Steam Turbines Maintenance, SEIMENSE (GERMANY).

-Machinery failure analysis (UAE).

-Reciprocating Compressors maintenance by Sulzer Burkhart (QATAR).

-Team Work Skills and problem solution (QATAR).

-Maintenance of the electric equipment (QATAR).