Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Senior Instrumentation Engineer seeks work in Middle East or USA

I am currently available for work
Serial No: 16211

List top 5 skills: pressure, temperature
Short Bio:

Dear Sir,
It is with pleasure that joined the company as a Senior Instrumentation Engineer and I have 18 years of experience, covers various areas mainly Field Instrument, PLC, SCADA,CMMS (Maximo 7.1), Tanks' gauging system (ENRAF TGS) and Fire & Gas and IT.
I have strong analytical, problem-solving and communication skills. I am using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems and implement solutions.

Current location: 

Egypt - View on map

Nationality: 

Egyptian

Preferred Sector of Employment: 

Oil, Gas and Energy, Manufacturing and Operations

Spoken languages: 

english

Locations I am interested in working:

kuwait, Oman, qatar, saudi arabia, United States



Education

• Bachelor Degree in Electronic Engineering (Communication Section) – 1995

• Graduate from: Banha University- Faculty of Engineering.

• Graduate year: 1995 / Project grade: Excellent.

• Graduation Grade: Very Good, 78.05% (The third of installment)

Career Summary

 I have18 years of experience, covers various areas mainly Field Instrument, PLC, SCADA, ESD, CMMS (Maximo7.1) system, Tanks’ gauging system and Fire & Gas.

 I have strong analytical, problem-solving and communication skills. I am using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems and implement solutions.

 Designed and Implemented the Upgraded the program PLC SIEMENS SIMATIC S5 – 115H to PLC program SIMATIC S7 – 317H for the Hydrogen Compressor GB – 302 A /B at AMOC site.

 Designed and Implemented the Upgraded the control system for the OVER HEAD compressor at Abo-Sanan plant. To control with PLC system based on SIEMENS redundant S7-412H system connected to ET200M I/O station.

 Design and sizing valve selection for any types of control valves and flow elements.

 Design and build the control loop and select the field instruments like, pressure, temperature, level and flow transmitter and switches according to functional and performance specifications and Preparation of Instrument data sheets.

 Maintaining the local panels including PLC’S and dealing with the trouble shooting for control system and for PLC’S SIEMENS SIMATIC S5 – 115H, SIMATIC S7 – CPU 300U, 414-5H, Remote I/O ET200M and ALLEN-BRADLEY PLC 5/20C, 5/40C.

 Familiar with the Maximo (CMMS) system.

 Participate the implementation a new CMMS system (Maximo).

 Testing, Calibrating and maintenance all types of the control valves.

 Tanks’ gauging system like ENRAF TGS (Servo motor 854XTG and Smart Rader antenna 873), Raptor TGS…,.

 Maintenance for all types of the protection instruments for the gas turbines like over speed, over temperature, vibration modules and calibrating the Bentley Nevada system for vibration.

 Conversant with P&IDs, Hazardous area classification, trouble shooting, cable specifications, intrinsic safety concepts, control systems (DCS), transmitters, valve positioner calibration and instrumentation concepts.

Areas of Expertise

 Field Instrument Engineer (Design & Maintenance).

 Tanks’ gauging system like ENRAF TGS (Servo motor 854XTG and Smart Rader antenna gauge873), Raptor TGS…, and adjusting the Reading to match the actual tank level dealing with the trouble shooting when required.

 Design and Implement the PLC Ladder Programming (Seminse S5 and S7, Allen Bradley), DCS (Honeywell TDC-3000, Seminse SPPA-T3000), and ESD systems with a good experience.

 Fire Protection and Gas Detection specialist (Design, Calibration, Troubleshooting and Maintenance).

 Design and implement a Classic Control system.

 Reviews the Bill of Quantities prepared by design engineers and contractors to ensure that in according to the drawings and specifications codes and standards.

 Reviews the cost estimates submitted by contractor, and ensures that compliance with Agreement, Contract drawings, Specification and accuracy of Company requirements.

 Preparation of Bill of Quantities based on Drawings and Specification.

 Familiar with the P&ID, Piping and shop drawings.

 Professional PC hardware repair and software troubleshooter (Computer Support Specialist).

Career Details

Manager of the Department of Instrumentation & Automatic Control– (PETROMAINT)(FEB. 2002 – Till now).

1- Designed and Implemented the Upgraded the program PLC SIEMENS SIMATIC S5 – 115H to PLC program SIMATIC S7 – 317H for the Hydrogen Compressor GB – 302 A /B at AMOC site.

2- Designed and Implemented the Upgraded the control system for the OVER HEAD compressor (RC) at Abo-Sanan plant. To control with PLC system based on SIEMENS redundant S7-412H system connected to ET200M I/O station.

3- Design and sizing valve selection for any types of control valves.

4- Design and build the control loop and select the field instruments like, pressure, temperature, level and flow transmitter and switches according to functional and performance specifications.

5- Maintaining the local panels including PLC’S and dealing with the trouble shooting for control system and for PLC’S SIEMENS SIMATIC S5 – 115H, SIMATIC S7 – CPU 300U, 414-5H, Remote I/O ET200M and ALLEN-BRADLEY PLC 5/20C, 5/40C.

Responsible for preparing and achieving the preventive and corrective maintenance work order for all instrumentation items which covers:-

1- Calibration and adjustment the field instruments like pressure, Temperature, level, flow transmitters and switches.

2- Testing, calibration and maintenance all types of control valves.

3- Observing the operation of Tanks’ gauging system and adjusting the Reading to match the actual tank level dealing with the trouble shooting when required.

6- Performing the I/O check and checking the program logic online and offline using PG 740 portable and making the necessary modifications in the program logics when required.

7- Starting up and downloading the program of the operating panel Siemens OP 17, OP27 using the program software PROTOL.

8- Commissioning, starting up, maintenance and trouble shooting of HANYWELL DCS system.

9- Carrying out the trouble shooting for the sequence machines and solving the problems for automation.

10- Adjusting and programming the AC inverters by setting the parameters.

11- Calibration and adjusting the weight scale for loading arm unit.

12- Carrying out the trouble shooting for the gas turbines including PLC’S and maintenance for all types of instruments like pressure, temperature, level, vibration switches.

13- Maintenance for all types of the protection instruments for the gas turbines like over speed, over temperature, vibration modules and calibrating the Bentley Nevada system for vibration.

14- Train the section’s team in maintenance principles and troubleshooting techniques.

15- Testing and calibrating some types of analyzers like PH & Conduct.

16- Good knowledge of work safety activities in the plant such as: Work Permit, Equipment Isolation, Working at heights, Chemicals handling, Scaffolds erection, Confined space entry, etc.

Responsible for preparing and achieving the preventive and corrective maintenance work order for all instrumentation items which covers:-

1- Calibration and adjustment the field instruments like pressure, Temperature, level, flow transmitters and switches.

2- Testing, calibration and maintenance all types of control valves.

3- Maintaining the local panels including PLC’S and dealing with the trouble shooting for control system and for PLC’S SIEMENS SIMATIC S5 – 115H, SIMATIC S7 – 300 and ALLEN-BRADLEY PLC 5/20C, 5/40C.

4- Design and sizing valve selection for any types of control valves.

5- Design and build the control loop and select the field instruments like, pressure, temperature, level and flow transmitter and switches according to functional and performance specifications.

6- Performing the loop check , sequence check for the control panel including PLC’S

7- Maintenance for all types of the protection instruments for the gas turbines like over speed, over temperature, vibration modules and calibrating the Bentley Nevada system for vibration.

8- – Observing the operation of Tanks’ gauging system and adjusting the Reading to match the actual tank level dealing with the trouble shooting when required.

9- Reviews the Bill of Quantities prepared by design engineers and contractors to ensure that in according to the drawings and specifications codes and standards.

10- Reviews the cost estimates submitted by contractor, and ensures that compliance with Agreement, Contract drawings, Specification and accuracy of Company requirements.

11- Preparation of Bill of Quantities based on Drawings and Specification.

12- Good knowledge of work safety activities in the plant such as: Work Permit, Equipment Isolation, Working at heights, Chemicals handling, Scaffolds erection, Confined space entry, etc.

Instrument Engineer –TECNICAS REUNIDAS. (TR)(NOV. 2001 – FEB. 2002)

1- Maintenance of the local panels including PLC’S and making the trouble shooting for control system and for PLC’S SIEMENS SIMATIC S5 – 115H, SIMATIC S7 – 300 and ALLEN-BRADLEY PLC 5/40C.

2- Performing the I/O check and check the program logic online and offline using PG 740 portable and making the necessary modification in the program logics.

3- Starting up and downloading of the program of the operating panel Siemens OP 17, OP27 using the program software PROTOL.

4- Commissioning, starting up, maintenance, trouble shooting of HANYWELL DCS system.

5- Performing the loop check , sequence check for the control panel including PLC’S

6- Calibrating and adjusting the weight scale, pressure, temperature, level, flow transmitters and switches.

7- Testing and Calibrating the control valves

Instrument Engineer – Startex for Textile(APR. 2000 – NOV.2001)

1- Maintenance of the steam boiler and solve or the trouble shooting of for BMS.

2- Maintenance the textile machine and solve the electrical and instrument trouble shooting.

3- Commissioning the dying factory and downloading the program for the PLC’S SIEMINS SIMATIC S5 – 100U and AC inverters using the laptop and making the necessary modification in the software and hardware.

4- Design the low voltage panels, cable tray and selecting the size of the cables and types.

5- Carrying out the trouble shooting for the sequence machines and solving the problems for automation.

Instrument engineer – Transport & Engineering (Trenco) (OCT.1997 – APR.2000).

1- Automation and sequence Machine controlled with PLC’S SIEMINS SIMATIC S5 – 100U, SIMATIC S7 – 300 and ALLEN-BRADLEY PLC 5/15

2- Drives DC and AC inverters.

3- Temperature controller and temperature transmitters.

4- Pressure transmitters and switches.

5- Level transmitters and switches.

6- Flow transmitters and switches.

7- I/P converters and all types of control valves.

Technical Support Engineer – Pan Arab Computer Center (PACC) (DEC.1996 –OCT1997).

1- Maintenance the apple Mac. Computer

2- Operation with LAN network

3- MULTIMEDIA , QUTRO PRO

4- Automatic test equipment

Certification & Training

1 – Vibration Instrument & Conditioning Monitoring System

(Bently – Nevada) from 18/8 to 22/8/2002.

2 – Sizing, Selecting and Applying Process Control Valves From

19/1 to 23/1/2003

3 – Intrinsic Safety from 20/3 to 24/3/2004.

4 – Understanding Distributed (DCS) Control System From

17/8 to 28/8/2003.

5 – Industrial Flow Measurement Engineering from 20/10 to 25/10/2002.

Languages

• Arabic

• English