Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Senior Electrical, Instrumentation Engr seeks job in Middle East

I am currently available for work
Serial No: 18720

List top 5 skills: • electrical, commissioning, construction, installation, instrumentation, mechanical
Short Bio:

I am a senior consultant with 28 years’ experience as a registered professional electrical engineer and specialist in instrumentation and control systems in the Oil and Gas, Energy, Power and Process industries.
I have over the years developed competence, and acquired skills for Electrical, Instrumentation and Control Systems Engineering Design, Installation, Construction, Commissioning and Project Management.

I have experience in working with multi-discipline and multi-national workforce

Current location: 

Port Harcourt Nigeria - View on map

Nationality: 

Nigerian

Preferred Sector of Employment: 

Oil, Gas and Energy, General Management

Spoken languages: 

english

Locations I am interested in working:

Anywhere



EDUCATION

1. University of Liverpool, UK….……………………………….…………….Jun 2010 – July 2013

MBA in Leadership

2. University of Lagos, Nigeria………………………………………………..Sept 1980 – Jul 1985

B.Sc. (Hons) Electrical Engineering (Second Class upper Division)

3. University of Lagos…………………………………………………………….……….Feb 1993

Advanced Diploma in Management (Upper Credit)

PROFESSIONAL QUALIFICATIONS

1. The Council for The Regulation of Engineering in Nigeria (COREN)…………….….May 1993

Registered Electrical Engineer (Reg. No.: R.5327)

2. Federal Ministry of Mines and Power…………………………………………..……March 2004

Electrical Wiring License (No.: 1583B)

3. The Nigerian Society of Engineers (NSE)………………………………………………Nov 1992

Corporate Member (Reg. No.: 05627)

TRAINING CERTIFICATES

• Sizing, Selection and Installation of Safety Relief Valves – Crosby Valve & Engineering Company Ltd, Leicestershire, UK.

• Installation, Maintenance, and Service of Meters, Valves and Accessories – Smith Meters G.m.b.H (Now FMC Company), Hamburg, Germany.

• Certificate of Maintenance Engineering; Valve Actuators – Rotork Controls Ltd. Bath England.

• Application of Programmable Logic Controller (PLC) and Relay Logic Systems.- (R&H the Netherlands)

• Gas Handling, Conditioning and Processing Facilities Design – Worldwide Petroleum Training USA.

• Comprehensive Project Management – Project Management Professional (PMP¬) Canada

• Modern Trends in Project Management – The Nigeria Society of Engineers

• Total Quality Management – Lagos Business School

• General Health, Safety & Environment – Shell Engineering, Warri.

• First Aid and Resuscitation Certificate – Shell Engineering Warri .

• Industrial Safety, General Management, and Leadership Task for Senior Managers – Agrovog Ltd Lagos

PROFESSIONAL PUBLICATION

“The Efficient Management of Nigeria’s Refineries: The Role of Maintenance”, paper presented at the Symposium on The Efficient Management of Nigeria’s Refineries, organised by The Nigerian Society of Chemical Engineers, at Sheraton Hotel & Towers, Ikeja, Lagos, on Friday, December 9, 1994.

LANGUAGE

ENGLISH FOREIGN

AREAS OF EXPERTISE

• Electrical, Instrumentation, Automation & Control Systems Engineering Design, Installation, Construction, Commissioning, Operation and Maintenance.

• Trouble shooting of Electrical, Mechanical, Control and Instrumentation Equipment & Devices

• Project and Engineering Management.

• Consultancy Services

• Leadership

• Business Development and Management.

• Budgeting, Finance, Profit and Loss Account

SUMMARY OF EXPERIENCE

27 years experience as a Consultant, Registered Professional Electrical Engineer and Specialist in Instrumentations and Control Systems in the Oil and Gas, Power and Process industries, with specific responsibility for:

• Oil & Gas Facilities FEED, Basic and Detailed Electrical, Instrumentation & Control Systems Engineering Design, installation, construction, hook-up, commissioning, operation and maintenance.

• Trouble shooting and repair of Electrical, Mechanical, Control and Instrumentation Equipment and Devices including:

– Metering Systems, Valves & Actuators, and Level / flow / pressure instruments such as transmitters, indicators and gauges.

– Fire and Gas detection, and alarm systems

– Control building lighting / power, perimeter lighting

– Earthing and lightning protection systems

• Electrical Engineering Design services, electrical installation, power line construction; High tension, Low tension, transformer and substation hook-up.

• Achieving the performance targets and expectations of company and customer, often to demanding schedules and tight budgets.

• Managing multi-discipline teams for a variety of projects, including grassroots (green field) sites and upgrade / revamp (brown field) modifications.

• Ensuring that all Health, Safety and Environment (HSE) requirements are identified resolved and satisfactorily implemented.

• Developing ‘fast-track’ execution plans and schedules in a team environment, to maximise ‘right-first-time’ approach and to minimise disruption to operating plant

Project / Engineering Manager of a couple of reputable and leading oil service companies, with full responsibility for delivering performance to strict financial targets and tight schedules, whilst achieving legislated HSE and prescribed quality requirements.

Consultant with responsibility for management, supervision, and participation in projects, and have participated in several projects in different capacities.

Principal Electrical and Instrumentation Consultant in the Nigerian Contractors’ Capacity and Capability Study Team of Consultants, for Suffix Energy / Shell Nigeria Exploration and Production Company Ltd, South West / Aparo FPSO Project, as well as on Exxon-Mobil’s Usari Offshore production platform instrumentation maintenance work.

Very knowledgeable in the application of relevant sections of international Codes, Standards and Regulations including: IP, API, NEC, ISA, ANSI, AGA, NEMA, ASME, IEC, BS, and ISO.

Furthermore, I have high proficiency in the use of the following software: MS Word, Excel, PowerPoint, MS Project, Windows NT, XP, 2000 series, WINs 7 and 8 versions of operating system, Primavera, Corel Draw and AutoCAD 2000 series.

Consulted at, the highest level on technical and policy issues, for the National assembly of Nigeria (Senate) Committee on oil industry matters. Worked with the committee during the facts finding missions to Latin American and Asian countries in 2001, and advised on policy direction, to ensure increased participation of Nigerians, in the industry. The policy is being implemented in the Nigeria’s Oil and Gas industry as Local Content Policy.

Very good organizational skill, with ability to manage time effectively, handle difficult situations and prioritize workload, to ensure efficient and timely delivery of all tasks at optimum cost, as well as experienced at working to tight deadlines under pressure, with proven track records.

ACHIEVEMENTS

Outstanding achievements made over the years include:

 Pioneered the design and replacement of First Shot Fire Fighting System and the associated piping canisters with Linear Heat Detection (LHD) system, on the floating roof of crude oil tanks in Shell Bonny Terminal; part of Bonny Tank Farm Fire Protection System Up-Grade, of Bonny Terminal Integrated Project (BTIP).

 Successful execution of the Conceptual, FEED, and Detailed Engineering and Design of the Instrumentation scope (see note 1 below) of the Largest Gas Transmission Pipeline in Nigeria and Africa; The 56inch x 405km Calabar-Umuahia-Ajaokuta Gas Transmission Pipeline, part of the Trans Saharan Gas Pipeline Project, for the Federal Ministry of Petroleum Resources (as Instrumentation Consultant to Frazimex Engineering Ltd / OilServ).

 Successful engineering and installation of over fifty numbers 33KV x 100KVA and 11KV x 100KVA transformers and the associated high tension power lines and substation equipment for Airtel Nigeria (formally Celtel Nigeria) in their GSM telecommunication cell sites across Nigeria.

 The Warranty / Pre-commissioning of the Nigerian National Petroleum Corporation (NNPC) New Port Harcourt Refinery Metering systems. The systems are completely microprocessor controlled and include five meter skids equipped with turbine meters, motorized valves, assorted instrumentations and registration console.

 Training of the Nigerian National Petroleum Corporation (NNPC) Warri refinery technical staff on meter proving and automatic sampling systems.

CAREER HISTORY

Medilantic Nigeria Ltd, Port Harcourt, Nigeria……………….……March 2005 – Dec 2014

Position: Principal Electrical / Instrumentation & Control Systems Engineer & Consultant

Responsible for:

• Planning, scheduling, and supervision of the engineering design activities, within the discipline.

• Preparation of Electrical and Instrumentation philosophies, procedures, specifications, datasheets, layouts, hook-ups, control systems architecture, cause & effects, sizing calculations and selection of instruments, alarm and trip settings etc.

• Preparation of Electrical and Instrumentation purchase requisition document

• Fire and Gas detection, and alarm systems design

• Electrical designs; Hazardous area classifications, perimeter and control room lighting, power layout, equipment layout, earthing and lightning protection system etc.

• Completion of conceptual scopes of work, preliminary design, and detailed engineering design

• Ensuring compliance of designs to codes, standards, regulations and practices, including IP, API, NEC, ISA, ANSI, AGA, NEMA, IEC, BS, ISO etc.

• Coordination of inter disciplinary checks, design reviews, HAZOP and SIL studies

• Review and management of project and general specifications, engineering procedures and engineering policy.

• All work completed in Electrical, Instrumentation & Control Systems discipline

• Preparation of the documentation for all projects and ensuring that it is properly archived.

• Providing engineering support to electrical, instrumentation and automation; installation, construction, pre-commissioning, commissioning and start-up activities.

• Managing the Electrical & Instrumentation team for a variety of projects.

• Training and development of the Electrical, Instrumentation & Control Systems Engineers

Delivered successfully and timely at optimum cost, several Electrical, Instrumentation and Control Systems landmark jobs including:

• The Conceptual, FEED, and Detailed Engineering Design of the Instrumentation and Control Systems (see note 1 below), of the Largest Gas Transmission Pipeline in Nigeria and Africa; The 56inch x 440km Calabar-Umuahia-Ajaokuta Gas Transmission Pipeline for the Federal Ministry of Petroleum Resources (as Sub-Contractor to Frazimex Engineering Ltd ).

• The Power Connection contract involving EPC of fifty numbers 33KV x 100KVA and 11KV x 100KVA transformers, and the associated high tension power lines and substation equipment, for Airtel Nigeria (formally Celtel Nigeria), in their telecommunication cell sites across Nigeria.

• Consultancy service for engineering the Installation & Hook-up of 500 KVA Gas Genset at Uquo facility, for Septa Energy Nigeria Limited on behalf of Accugas Limited (both subsidiaries of Seven Energy International Limited, UK).

• The EPC contract for Fire Protection System Up-Grade, involving Replacement of First Shot Fire Fighting System, and the associated piping canisters, with Linear Heat Detection (LHD) system on Ten Numbers Crude Oil Storage Tank; part of the Shell Bonny Terminal Integrated Project (BTIP).

• The Conceptual, FEED, and Detailed Engineering and Design (Electrical, Instrumentation/Fire & Gas and Telecommunication Scopes (see note 1 below)), of the EPC of the Obiafu/Obrikom-Oben (OB3) Gas Pipelines Lot A (63km x 48”) & Lot B (64km x 48”) for the Nigerian National Petroleum Corporation (as a Sub-Contractor to Fraximex Engineering Ltd / Oilserv Ltd)

• The Conceptual, FEED, and Detailed Engineering and Design (Electrical, Instrumentation/Fire & Gas and Telecommunication Scopes (see note 1 below)), of the Calabar-Umuahia-Ajaokuta Gas Pipeline System (Phase 3) for the Federal Ministry of Petroleum Resources (as a Sub-Contractor to Fraximex Engineering Ltd / Oilserv Ltd)

• The EPC of Ikeja Gas Metering Station Upgrade (Electrical, Instrumentation/Fire & Gas and Telecommunication Scopes); part of the EPC Contract for Gas Supply to Lagos Industrial Area, for the Nigerian Gas Company (as a Sub-Contractpr to Fraximex Engineering Ltd / Oilserv Ltd). The upgrade was to increase the station capacity from 35MMSCFD to 100MMSCFD.

• The Detail Instrumentation Engineering and design; part of the EPC of Gas transmission Pipelines and Metering Stations Lots (1 & 2) Project for the Niger Delta Power Stations at Eyean, Egbema, and Gbaran–Ubie (as a Sub-Contractor to Frazimex Engineering Ltd / Oilserv Ltd).

• The Detailed Electrical / Instrumentation Engineering and Design (see note 1 below), for: Owaza-Osisima 12 Inch x 27Km Gas Transmission Pipeline Project for Geometric Power Aba Limited. (as a Sub-Contractor to Frazimex Engineering Ltd Oilserv Ltd).

• The Conceptual, FEED, and Detailed Engineering and Design of the 36inch x 37km Calabar-Umuahia-Ajaokuta (Calabar-Okopedi Gas Spur Pipeline) Gas Transmission Pipeline Instrumentation (see note 1 below), for the Federal Ministry of Petroleum Resources (as a Sub-Contractor to Frazimex Engineering Ltd / Oilserv).

Note 1: WORK DONE IN GAS PIPELINE PROJECTS

The Electrical and Instrumentation works carried out in the Gas Transmission Pipeline Projects listed include but not limited to:

1. Conceptual, FEED and Detailed Engineering Design of Electrical and Instrumentation of the End & Intermediate facilities comprising Pressure Regulation and Metering station, Pigging station and Control Rooms.

2. Specific work carried out in each facility / equipment include:

– Preparation of Basis of Design and Concept Definition

– Sizing calculations, selection and specification of instrumentations for Pig launchers / Receivers, Slug catchers, Scrubbers, Filter Separators, Gas Heaters, Pressure Reduction skids, Metering skids, Emergency Shutdown Valves, Control Panel and Design of Control Systems Architecture.

– Design of Control Room lighting / Power and equipment layouts, Earthing & Lightning Protection Systems, and Perimeter Lighting

– Fire & Gas Detection and Telecommunication systems design.

– Attendance to Hazard and Operability (HAZOP) Study and Safety Instrumentation Level (SIL) Study

3. The Instruments, Electrical equipment and Services covered include:

– Pressure / Temperature / Level transmitters, indicators & gauges, Flow Meters and transmitters, Shutdown Valves, Blow down Valves, Control Valves, Pressure Relief Valves, Gas Chromatography, SCADA, PLC, Cause & Effect Matrix, Marshalling Cabinet etc

– Generators, Fire pump control panel, Hazardous Area Classification, Cable Sizing, Low Voltage Distribution Board etc.

4. The Design Deliverables include: Basis of Design, Philosophies, Specifications, Datasheets, Loop drawings, Hookup and Schematic Drawings, Cable Route / Trench details, Main power generation and distribution schematics / single line diagram, Material Take-Offs, Junction Box Wiring & Termination details etc.

5. Follow-on Engineering; Vendor document review, Procurement support; Vendor query response, Provision of engineering support to electrical, instrumentation and automation; installation, construction, pre-commissioning, commissioning and start-up activities.

• Medilantic Nigeria’s first inspection services job involving inspection of the Fabrication of 23 sets of skid comprising: 9 Test/LP/HP Separator Package, 4 Surge Vessel Skid, 2 Slug Catcher Skid, and 8 Flare KO Drum Package at Robey Dorman Long (RDL) and Navy Dockyard Lagos; part of Shell Forcados Yokri Integrated Project (FYIP), for ABS Consulting South Korea.

• The inspection services contractor for the repair of a Pig Launcher at Energy Equipment Services (EES), Onne Port Harcourt; part of Shell Forcados Yokri Integrated Project (FYIP) for ABS Consulting, South Korea.

• Inspection services contract for fabrication of spool pieces at Amber Resources, Eleme Junction, Port Harcourt for ABS Consulting, Singapore

• The contract for Rehabilitation of BCF fire alarm control panels and systems at NNPC-PPMC Petroleum Storage and loading Depots located at satellite, Atlas Cove, Mosimi and Ibadan.

 

Linkso Nigeria Ltd, Lagos, Nigeria………………………………………………..Aug 2001 – March 2005

Position: General Manager (Engineering and Technical Services)

Reports to the Managing Director

Responsible for:

• Managing the engineering and technical services division.

• Day to day management and strategic operation of the division

• Formulation of the division’s goals and strategies for attainment

• Business development, marketing and bid preparation (technical and commercial)

• Contract negotiations and Project execution.

• Overseeing the Safety, Security, quality assurance and quality control programs.

• Project planning; work scheduling, and supervision of the overall design and engineering activities, within and cross discipline.

• Coordination of inter disciplinary checks, design reviews and HAZOPS

• Review and management of project and general specifications, engineering procedures and engineering policy.

• Preparation of the documentation for all projects and ensuring that it is properly archived.

• Training and development of engineers.

• Staff evaluations.

• Leading and managing over three hundred multi-discipline and multi-national technical staff of Chevron Nigeria Ltd in three years Global Manpower Supply and Management Contract.

• Managing over two hundred and fifty multi-discipline and multi-national; quality surveillance expatriate and local engineers and personnel, and quality of work, for the SHELL Forcados Yokri Integrated Project (FYIP) from engineering through procurement to installation and construction, monitoring of the EPIC contractor’s QA/QC activities by reviews, audits and quality surveillance as Shell’s QA Verification Representatives and conformance certification of project deliverables.

• Managing Two hundred and fifty multi-discipline and multi-national design engineers, construction inspectors and technical personnel located overseas and in several construction sites in the Niger Delta, Nigeria, for over two years for the Nigerian Agip Oil Company Ltd (NAOC) NLNG phase 3 project

Won and delivered successfully, timely and profitably several jobs including:

• The $15million Project Management Consultancy Services Contract won by Linkso and her alliance partner Snamprogetti UK Ltd, to manage the EPC contract of the Nigerian Agip Oil Company Ltd (NAOC) N-LNG Gas Supply Project –Phase 3. Deputed local and expatriate engineers and project admin personnel to oversee on behalf of NAOC, the activities of the EPC contractor in the design office in Romania and Project management office in UK. Deployed and managed over two hundred multi-disciple and multi-national; local and expatriate surveillance engineers and inspectors in different construction sites in the Niger Delta region in Nigeria.

• The $13million Exxon-Mobil project management services for EPIC of QIT Loading Systems project

• The $9 million first Quality Management Services (QMS) contract awarded to a wholly indigenous Nigerian Company, to manage the Shell Forcados Yokri Integrated Projects’ (FYIP) quality of work from engineering through procurement to installation and construction. in Deployed and managed over two hundred and fifty multi-discipline and multi-national; quality surveillance expatriate and local engineers and personnel in the construction sites in Nigeria. Engaged ABS Consulting UK, for witness inspection in fabrication yards in USA, South Korea and other countries where various fabrications were done.

• Provision of engineering design services for Saipem Energy International Services (SEIS) in Port Harcourt in which about ten engineers were dedicated to, amongst others.

Niger global Engineering and Technical Company Ltd, Lagos….………Oct 2000 – July 2001

Position: Engineering manager

Responsible for:

• Planning, scheduling, and supervision of the overall design and engineering activities, within and cross discipline.

• Coordination of inter disciplinary checks and design reviews

• Execution of conceptual scopes of work, preliminary and detailed engineering designs.

• Reviews and management of projects, general specifications, engineering procedures and engineering policy.

• Preparation of the documentation for all projects and ensuring that it is properly archived.

• Recruitment, training and development of Engineering personnel

• Engineering staff evaluation and appraisal.

• Contract sourcing

Won a couple of multi-million Naira engineering jobs and ensured successful and timely delivery at optimum cost, including:

• The contract for construction of defunct Citizens Int’l Bank Ltd Headquarters Extension, Lagos and Regional Office Project at Owerri, Eastern Nigeria.

• Remodelling of contractors canteen for Chevron Nigeria, at Lekki, Lagos

• Consultancy Services to the National Assembly of Nigeria Senate Committee on oil industry matters, aimed at ensuring increased participation of Nigerians, in the industry.

National Engineering and Technical Company Ltd (NETCO), Lagos…May 1999 – Sept 2000 (A subsidiary of the Nigerian National Petroleum Corporation (NNPC))

Position: Senior Electrical, Instrumentation & Control Systems Engineer

Project:

Shell Nigeria; Conceptual Design of Cawthorne Channel Gas Injection / Supply Project

Reports to the Lead Electrical & Instrumentation Engineer

Responsible for:

• Preparation of E & I philosophies, procedures, specifications, datasheets and drawings.

• Supervision of the checks and performance of the E & I design and engineering of the gas production facilities and the supporting infrastructure.

• Coordination of inter disciplinary checks and design reviews

• Completion of conceptual scopes of work and preliminary designs.

• Ensuring compliance of designs to codes, standards, regulations and practices, including IP, API, NEC, ISA, ANSI, AGA, NEMA, etc.

Atlas Cove depot optimization construction work; Electrical & Instrumentation Consultant

Lead Electrical & Instrumentation Engineer

Reports to the Project manager

Responsible for:

• Planning, managing and coordination of all activities associated with the construction, installation and commissioning of Electrical and Instrumentation facilities.

• Liaison between E & I groups in the project, including construction and installation contractors.

• Development, implementation and ensuring adherence to Project environmental and safety management programs by the construction contractor

Chevron / Netco / ABB Design Office: Tapa field gas lift project;

Lead Electrical & Instrumentation Engineer

Reports to the Design Office Head of Engineering

Responsible for:

• Planning, scheduling, and supervision of the E & I design and engineering activities.

• Coordination of inter disciplinary checks and design reviews

• Completion of detailed engineering design.

• Preparation of E & I philosophies, procedures, specifications, datasheets, layouts, hook-ups etc.

• Preparation of Electrical and Instrumentation purchase requisition document

Gentek Ltd, Lagos, Nigeria.….……………………………….…..September 1995 – May 1999

Position: Operations Manager

Reports to the Managing Director

Responsible for:

• Marketing, sale, installation and service of the Company’s range of products including petroleum loading and dispensing equipment; loading arms, dispensing pumps and nozzles etc.

Cakasa Nigeria Company Ltd, Lagos……………………………………………….. Jun 1992 – Sept 1995

Position: Area Manager

Reports to the Executive director with responsibility for:

• Marketing, sales, installation and provision of after sales support on the company’s range of oil and gas equipment including: Crosby Valves, General Twim Seal Valves, Rotork Valve Actuators, metering products, control and instrumentation equipment.

• Day to day management and strategic operation of the Area Office

• Formulation of the Area Office goals and strategies for attainment

• Business development, marketing and bid preparation (technical and commercial)

• Contract negotiations, Order and Project executions.

Cakasa Nigeria Company Ltd, Lagos……………………………………………….Jan 1987 – June 1992

Position: Sales/Service Engineer

Reports to the Technical Manager

• Was one of the six pioneer engineers of the company

• Trained product specialist on Crosby Valves, General Twim Seal valves, Rotork valve actuator, Smith Meters & accessories, System automation; application of PLCs and Relay Logic Systems including Modicom PLCs (Now Schneider).

• Sales, installation, commissioning, and repair / service of flow measurement systems, control and instrumentation equipment including valves, actuators, flow meters, etc.

• Sales, installation, commissioning, repair, service and calibration of flow measurement systems, control and instrumentation equipment.

Some outstanding accomplishments made include

 The commissioning of the Nigerian Agip Oil Company (NAOC), Beneboye Telemetry system; used to monitor NAOC remote meter bank at a distance of two kilometers across a jungle. The successful commissioning of the system engraved the company’s name in gold in NAOC,because a foreign company contracted to commission the system failed. The system blew up and Cakasa was invited. To effect the commissioning:

– The system was stripped down and the burnt components replace

– The interconnecting cables from a remote meter bank at a distance of two kilometers in Shell’s Forcados Terminal which failed continuity test were traced.

– The point of defect was located midway in the two kilometer jungle and repaired.

– The system was then successfully commissioned and started up.

 Commissioning of Agip Energy Agbara Offshore Production Prover loop located at NAOC Brass Terminal.

 Commissioning of 192 Numbers Rotork Valve Actuators and control consoles located at Pipelines and Product Marketing Company Ltd (PPMC), a subsidiary of NNPC, four numbers depots in Suleja, Niger State, Gombe, Buachi state and Jos, Plateu state for the main contractor Zakhem Construction, as well as at Calabar loading facility, Cross River state for IPCO.

 Upgrade of Shell Bonny Terminal Metering System involving overhaul of equipment and installation of new facilities, such as motor operated valves, microprocessor controllers, control panels, trenching, cable laying and terminations

 Rehabiltation of NNPC-PPMC burnt loading facilities at Satelite depot Ejigbo, Lagos, Mosimi depot, Ogn State and Kano depots.

 Reactivation of metering systems for NAOC at Tebidaba and Obama flow stations (swamp locations) in Rivers state.

 Overhaul of 12 offshore and 14 onshore General twim seal valves and associated instrumentations at shell Bonny Terminal.

 Warranty / Pre-commissioning job on the NNPC New Port Harcourt Refinery Metering systems. The systems are completely microprocessor controlled and include five meter skids equipped with turbine meters, motorized valves, assorted instrumentations and registration console.

 Training of NNPC Warri refinery technical staff on meter proving and automatic sampling systems.

Federal University of Technology, Owerri, Nigeria……..……September 1995 – August 1986

Position: National Youth Service Corp (Youth Corper)

Responsibilities include preparation of laboratory apparatus and supervision of Electrical/Electronic Engineering students’ practical works; part of one year national youth service assignment.