Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Romanian Highly Skilled Engineer from Commissioning to Maintenance

I am currently available for work
Serial No: 16000

List top 5 skills: 
Short Bio:

I have 14 years in Oil&Gas and Alumina industry as: Field Engineer, DCS Administrator, Project Manager, I&C Design Engineer, Automation Commissioning Engineer and PLC Analyst across the following countries:
- Romania (with KazMunayGas)
- Kazakhstan (with KazMunayGas)
- Nigeria(with ENI)
- Algeria(with ENI)
- Italy(with Hitachi & Aramco)
- Japan(with Hitachi & Aramco)
- Libya(with ENI).
I know the Russian language-spoken and written(technical), the French language (written) .

Current location: 

Romania - View on map

Nationality: 

Romanian

Spoken languages: 

english, french, russian

Locations I am interested in working:

Anywhere

List of countries I have a visa to work in:

Italy, Japan, Jersey, kazakhstan, libya, nigeria



Work Experience

ENI, Wafa Desert Plant – Libya

March 2014 – Present Electrical – SCADA & PLC Engineer analyst

 Provide technical analysis for the automation incidents and solution for the improvement of the technological process according with the international standards for automation;

 Responsible for the routine maintenance on AC and DC UPS systems and batteries in the electrical substation and to the wells is in accordance with the relevant work standards;

 Field service activities, maintenance, fault finding and repair for the: Electrical control system, UPS, protection relays and switchgears;

 Maintain/ program/ operate PLC systems and networks to ensure the optimum performance of the Electric control system;

 Provide programming/ electrical/ control support for the maintenance department and for the process department to ensure that the final products are built in accordance with requirements while maintaining production flow;

 Use aquired knowledge to diagnose and resolve causes of electrical and instrumentation malfunctions on all plant equipment;

 Assist in installing new electronic/ electric control equipment;

 Maintain updated electrical and loop drawings/ schematics for the plant;

Monitoring and Control systems:

 DCS system: ABB DCS & SCADA RTU – Tenore architecture;

 ESD, F&G: Hima;

 Vibrating monitor system: Bentley Nevada;

 GTG and GTC Control System: Mark V;

 EDG control system: GE Fanuc PLC;

 Air compressor: Siemens PLC-200 series;

 Electrical control system: Modicon & Scada Concept.

 Alderlay’s metering skids.

Hitachi – Aramco, Oil Refinery Jazan(KSA), Tokyo office – Japan

Aug 2013 – Dec 2013 Instrumentation & Control Design Engineer

 Engineering solution for the industrial automation systems;

 Creating or supervising the technical specification and datasheets;

 Supervising and control the designing of the deliverables for the instrumentation & control;

 Designing or cross checking the automation logic diagrams for DCS, FG & ESD systems;

 Technical interfacing, from the instrumentation side, between the Client and the EPC;

 Technical bid evaluation for the offers;

 Technical meeting reports for the top management.

 Implementation of the electrical equipment in hazardous areas requirements (IEC 60079), set of standards and the ATEX directive, functional safety and the requirements of IEC 61511 and IEC 61508, selection and application of field instrumentation and knowledge of control systems including software, hardware, communications, networking and security.

Monitoring and Control systems:

 DCS system: Honeywell EPKS

 ESD, F&G: Honeywell – Safety Manager

 Vibrating monitor system: SKF

Saipem – Eni, Natural Gas Liquefaction Gas Plant Arzew, Algeria

Jan 2013- Aug 2013 Automation Commissioning Engineer

 Control and supervise the site construction/installation quality and safety concerns.

 Review construction method statements, pre-commissioning procedures and endorse red-marked as-built drawings and construction dossiers.

 Control and endorse work permits for project work.

 Commissioning and Start-Up/Liquefaction/Fractionating Unit/Utility Unit

 Coordinating the automation commissioning activities, particularly for DCS and PLC systems both in the planning and execution phase

 Assuring that progress towards commissioning progress goals in conformity with the P&ID’s, C&E’s, F&G’s, Logic Diagram and Wiring loop diagram

 Made reviews of the designing, punch lists for construction and highlights for the engineering department during the pre-commissioning period.

 Assuring these activities are appropriately risk managed

 Working effectively to assure that the commissioning work integrates well in the overall project plan, functional tests with the Client;

 Technical assistance and proposals for the Start-up manager in the start-up activities;

 Functional control and shutdown tests with the Customer (Sonatrach), between DCS-ESD-PLC-Field instrumentation;

Monitoring and Control systems:

 DCS system: Honeywell EPKS

 ESD, F&G: Honeywell – Safety Manager

 BMS: HIMA

 PLC: Siemens – CPU 400 Series, Schneider

 Turbine speed control system: Mark VI

 Vibrating monitor system: Bentley Nevada

Gas turbine power generators (GE):

 Combustion gas turbine type: GE- PG 6581B (Frame 6)

 Power synchronous generator type: Brush – DG 215ZP-04

Residue Gas Compressor (GE):

 Gas turbine type: Nuovo Pignone- MS5002C (Frame 5)

 Centrifugal compressor type: Nuovo Pignone- BCL 806 (1 stage)

 Speed control – Speedtronic (Mark VI)

 Antisurge control – CCC – Compressor Control System (Vanguard 5)

Auxiliary Propane Gas Compressor (GE):

 Gas turbine type: Nuovo Pignone-MS5002C LHE (Frame 5)

 Centrifugal compressor type: Nuovo Pignone-3MCL1005 (3 stages)

 Speed control – Speedtronic (Mark VI)

 Antisurge control – CCC – Compressor Control System (Vanguard 5)

Boil Off Gas (cryogenic) Compressor (Siemens):

 Model: STC-SH

 Type: 10-6-A

 Turbine + Compressor control – Siemens PCS7 & CPU 400 series

Dietsmann – Agip, Nigeria

Aug 2012 – Dec 2012 Automation Commissioning Specialist

 IDU – Flow Station

 Operation and Maintenance for Oil, Gas, LNG and Power Plants

 Technical solution for putting in ON for industrial automation systems, instrumentation and control valves

 Technical remarks for As Built design

 Some modification in operator’s displays

 Supervising electrical & instrumentation construction activities (connections, calibrations, mounting and start-up) and QA-QC documentation

 Supervising on the field all electrical and automation commissioning activities, functional tests with the Client;

 Calculation and proposals for the changing of the nominal operating point and surge margin of the Siemens compressors according with the new process characteristics;

 Operator and trainer at Start-up for the compressors and configuration in DCS(DeltaV) for a special load sharing module (double cascade control) instead of the Vendor load sharing defective equipment.

 Technical reports for the management: finalized activities, targets and functionality in conformity with the specifications

Site systems:

 DCS: Delta V

 ESD: HIMA

 PLC: Allen Bradley, GE Fanuc

Gas turbine power generators (Caterpillar):

 Combustion gas turbine & driven generator set : Solar Mars 100S (turbine Caterpillar & compressor Siemens)

Gas LP Compressor (Caterpillar):

 Gas turbine & compressor set – Solar Centaur 40

 Speed control – TurboTronic (RS logix – Allen Bradley)

 Antisurge control – Control system (RS logix – Allen Bradley)

Rompetrol – KazMunayGas, Kazakhstan

Oct.2007 – Oct.2012 Instrumentation and Control Engineer

 Engineering solution for the industrial automation systems;

 Bill of materials, cost and time evaluation for the project proposals;

 Creating technical specification and datasheets for instrumentation and process control systems;

 Designing instrumentation diagrams (wiring/ logic);

 Designing automation diagrams for DCS and ESD systems;

 Designing operator’s displays;

 Supervising electrical & instrumentation documentations for the other projects: PI&D’s, technical specifications, technical datasheets, basic and detail design for connection, construction work, QA-QC documentation;

 Technical bid evaluation for the offers;

 Supervising on the field all electrical and automation commissioning activities, functional test with the Client;

 Technical assistance and proposals for the Start-up manager in the start-up activities and for the Project manager in the preliminary and final handover process;

 Technical reports for the management: time estimation and cost engineering, bill of materials, planning activities, project status;

 Integration of the PLC Siemens packages (cooling towers, compressors and inline blending for gasoline and diesel) in DCS (Emerson-DeltaV);

Monitoring and Control systems:

 DCS system: DeltaV, Yokogawa, Foxboro & PCS7 (compressor and advance process control for the inline blending systems)

 ESD: DeltaV SIS, HIMA, Yokogawa

 BMS: DeltaV SIS

 PLC: Siemens Step7 (cooling systems), Schneider Modicon (electrical systems), Rockwell RS Logix5000-Allen Bradley(pump controls), GE Fanuc series 90(compressor controls)

 Turbine control system: Woodward GE

 Vibrating monitor system: Bentley Nevada

Engineering & Design Software:

 CIMS 4.0 – Wirings, Instrument & Control loops

 INtools – SmartPlant Instrumentation Vers. 8.0 – Instrument & Control loops, datasheets, Sizing the control valves and orifice plates & Technical Specifications, Hook-ups

Rompetrol, Romania

Feb. 2007 – Oct. 2008 DCS & PLC Engineer

 Maintaining in operation, assigning and calibrating transducers in the DCS database

 Programming with industrial language (FBD, IL, Ladder) instrumentation and control loops

 Creating dynamical operator and supervisors screens

 Configuring Event-Journals, historian records, trends and alarm management for industrial parameters

 Programming digital communication between PLCs and DCS (MODBUS, Profibus DP)

 Maintaining DCS/PLC controllers cabinets, acquisition cards and power supplies

 Maintaining software and hardware operation for ESD systems

Monitoring and Control systems:

 DCS system: Delta V

 ESD: DeltaV SIS, HIMA

 BMS: DeltaV SIS

 PLC: Siemens(CPU 300 series), Moeller, Allen Bradley, GE Fanuc

 Turbine control system: Woodward GE

 Vibrating monitor system: Bentley Nevada

Alumina Refinery – Balli Group London, Romania

2006 – 2007 Project Manager for Instrumentation and Control Projects

& Administrator for Process System Control

 Technical project proposals for the top management;

 Proposals for the process control modernization.

 Cost and time evaluation for the designing, procurement, construction and commissioning – startup.

 Designing, Technical bid evaluation for the offers.

 Supervising for the implementation of the projects;

 Techno-economic reports for the top management.

Monitoring and Control systems:

 DCS system: Delta V

 BMS: Saake

 PLC: Schneider, Allen Bradley

2001 – 2005 Administrator for Process System Control – DCS

 Maintaining in operation , assigning and calibrating in the DCS database

 Programming with industrial language (FBD, IL, Ladder) instrumentation and control loops

 Creating dynamical operator and supervisors screens

 Configuring Event-Journals, historian records, trends and alarm management for industrial parameters

 Supervising the mounting condition and commissioning for every automation device

 Maintaining DCS/PLC controllers cabinets, acquisition cards and power supplies

 Maintaining analytical equipments (titration, spectrometer, gas chromatographs) from laboratory

Monitoring and Control systems:

 DCS system: Delta V

 BMS: Saake

 PLC: Schneider, Allen Bradley

2000 – 2001 Instrumentation and Control Engineer

 Maintaining in operation , installation and calibrating in the field instrumentation and control devices with the Hart-communicator

 Connecting field devices in DCS’s marshaling cabinets

 Maintaining DCS/PLC controllers cabinets, acquisition cards, power supplies and uninterruptible power supplies (UPS)

 Maintaining analytical equipments (titration, spectrometer, gas chromatographs) from laboratory

Monitoring and Control systems:

 DCS system: Delta V

JR Electronics, Constanta, Romania

1993 – 2000 IT Service Engineer

 Assembling personal computers, operating systems and drivers installations, network configurations and system optimizations

 Repairing power supplies, monitors and other PC terminals

 Securing with antivirus software, maintaining and operating in NT database server

PROJECTS

2013 Hitachi, Japan

JAZAN Oil Refinery (Aramco) – Basic and detail engineering for the instrumentation and the Process Control system from the Utility Area. Technical interface between the EPC and the Client.

2013 Eni, Algeria

Gas plant ARZEW-Natural gas liquefaction plant

2012 Agip, Nigeria

Gas plant IDU-Flow Station (including commissioning & start-up for the Emerson metering skids with coriolis flowmeters and the Petrocount flow-computers)

2012 Rompetrol Group – Petromidia Oil Refinery, Romania

Cogeneration-Power Plant HRSG 250MW (DeltaV Ovation commissioning)

2012 Rompetrol Group – Petromidia Oil Refinery, Romania

Hydrocracking unit (Siemens PCS7 for MAN Turbo compressor)

2012 Rompetrol Group – Petromidia Oil Refinery, Romania

In-Line blending for gasoline and diesel modernization (Siemens PCS7 & Invensys Foxboro, including engineering & comissioning start-up for the metering skids Emerson with coriolis flowmeters)

2010 – 2011 Rompetrol Group – Petromidia Oil Refinery, Romania

I&C engineering design & commissioning start-up for the Fiscal liquid metering skid for liquids (DeltaV with DanPac system, FloBoss S600, coriolis and ultrasonic fowmeteres)

2010 – 2011 Kaz Munay Gas – Atyrau Oil Refinery, Kazakhstan

I&C Design engineer for Delayed Coker Unit Modernization

2010 – 2011 Rompetrol Group – Petromidia Oil Refinery, Romania

I & C Design engineer for Industrial Cyber Security

2010 Kaz Munay Gas – Atyrau Refinery, Kazakhstan (I&C Design engineer)

Revamp Atmospheric & Vacuum Distillation Fournaces

2010 Rompetrol Group – Petromidia Oil Refinery Romania

Oil Tank Farm Modernization

(including engineering & comissioning start-up for the Metering skids Emerson with corilis flowmeters and Omni flowcomputers for Gasoline and Diesel)

2009 – 2010 Rompetrol Group – Petromidia Oil Refinery & Akatas Turkey

Briquetting Coker Unit

2009 Rompetrol Group – Petromidia Oil Refinery Romania

Modernization LDPE PLANT & transfer in DCS

2008 – 2009 Rompetrol Group – Vega Oil Refinery Romania

Plant Information System for Vega Refinery

2007 – 2008 Rompetrol Group- Petromidia Oil Refinery Romania

Cooling Tower Systems (PLC Siemens-Step 7, Krohne ultrasonic flowmeters)

2006 – 2007 Alumina Refinery Plant

New instrument & control equipments implementation for Balli Group London – UK, Romania

2000 – 2005 Alumina Refinery Plant

DCS modernization for Balli Group London – UK, Romania

COURSES & CERTIFICATES

KROHNE ENGINEERING ACADEMY :

– Vortex Flowmeters

– Electromagnetic flowmetes;

– Ultrasonic flowmeters;

– Pipeline leak detection system;

– Basics and physics of gases;

– Industrial temperature measurement .

Emerson

Certification in flow measurement systems

RASIROM

Certification in Management of the Computer Network Security

CODECS

Certification in Project management

Emerson

Certification for Asset Management System

Certification in Rockwell control systems

ISA – International Society of Automation

Courses to acquire the certification in Control systems Engineer CSE License

Courses for authorization ISCIR Romanian equivalence for NFPA Standards (National Fire Protection Association)

Certification in maintenance for electrical equipment in industrial plants

Certification in maintenance for Radio & TV equipment

Specialization in military communication

Specialization in maintenance of portable radio-communication station and pagers

Specialization in computer service for Microsoft products and developing network communications

EDUCATION

Ovidius University, Constanta, Romania

BSc Electronics Engineering Technology

SKILLS

Foreign languages English – Advanced Level

Russian – Medium Level

French – Beginner Level

Italian – Beginner Level

Turkish – Beginner Level

Arabic – Beginner Level

IT Skills Operating Systems: OS Windows 3.1- 7 Professional, Windows Server 2008

GUI’s & Languages: MS Office, Visual Basic 6 and Visual Basic for Application General & Graphics Applications: AutoCAD, MS VISIO, MS Project

Industrial Control System: DeltaV v4-11, SCADA(WINCC2007 / RSview32)

PLC (Step7, RSlogix 5000 V.12-15) , Siemens Step 7 & PCS 7

Engineering & Design Software: CIMS 4.0, INTOOLS – SmartPlant Instrumentation Vers. 8.0