Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Oil And Gas Field Operator Looking Globally

I am currently available for work
Serial No: 41200
(03/06/1981, male)
List top 5 skills: 
Short Bio:

I have more than 13 years of Experience as a Field Operator in Oil & Gas
Also Experienced as Commissioning and Pre commissioning Activities, Process Operation and DCS.

Current location: 

India - View on map

Nationality: 

India

Preferred Sector of Employment: 

Oil, Gas and Energy

Spoken languages: 

english, Hindi, Malayalam

Locations I am interested in working:

Anywhere



Qualifications

 DME (Diploma in Mechanical Engineering)-1998- 2001

 Awareness in advanced Computer software & Hardware.

 Driving license (LMV)

 

Work Experience

TOTAL EXPERIENCE : 13 YEARS of experience (Both India & Overseas) as Commissioning/ Production / Process Operator in Oil & Gas field.

• Worked as a Process Operator in AL Hosn Gas, Abudhabi through Saipem since June 2014 to August 2015.

• Worked as an Operation Foreman in Abudhabi Company for Onshore Oil Operations (ADCO) from Nov 2012 to Jan 2014 through Technicas Reunidas.

• worked as a Field Operator in Petrofac International Ltd., Algeria from July 2007 to September 2012.

• Worked as a Production Operator in Bombay High (Off-shore platform) – ONGC (Oil & Natural Gas Corporation) from June 2003 to Apr 2007.

• Worked as a Field Operator in Onshore Gas Processing plant, GAIL UP India from July 2001 to May 2003.

DETAILS OF EXPERIENCE

A. Al Hosn Gas , Abudhabi as a Process Operator.

Abu Dhabi Gas Development Ltd, “ A Limited Liability Company” (Al Hosn Gas) was established by the Emiri Decree no. (03/2010) issued on 1st February 2010. The new company’s headquater is based in the city of Abu Dhabi and recognized and honored as one of the proud ADNOC Group of Companies.

The purpose of the company is to develop the Arab A,B,C and D sour gas reservoirs located in the Shah Field onshore of Abu Dhabi. This will include extraction of the sour gas, liquid hydrocarbons and sulphur from the reservoirs, construction and operation of all facilities required to produce, transfer, process, meter, store, transport and deliver the sour gas from the production wells to the delivery points and marketing sulphur for export abroad.

B. ADCO, Abudhabi as an Operation Foreman.

The Abu Dhabi Company for Onshore Oil Operations (ADCO) operates onshore and in shallow coastal water of the Emirate of Abu Dhabi, one of the seven members of the United Arab Emirates which was established on 2nd December 1971.

The original concession agreement was made with Petroleum Development (Trucial Coast) Ltd. On 11th January 1939, but geological work did not begin until after the Second World War. Exploratory drilling began in Abu Dhabi in February 1950.

C. PETROFAC – Field Operator

The El Merk CPF located in Block 208, Algeria, will be operated by Sonatrach and Anadarko on behalf of the El Merk partners: Sonatrach, Anadarko, Maersk Oil, Eni, ConocoPhillips and Talisman (Algeria).

The combined nominal capacity of the initially installed processing facilities will be 98,000 barrels of oil per day, 29,000 barrels of condensate per day, and 31,000 barrels of liquefied petroleum gas (LPG) per day together with an NGL train with a nominal capacity of 600 million standard cubic feet per day. The CPF will also include 500 million standard cubic feet of residue and re-injection gas compression and approximately 80,000 barrels per day of produced water treatment and re-injection facilities.

D. Platform Operations: Heera Platform (Bombay high Off-shore).

The Well fluids coming from different wells collect at main manifold in the process platform. Then the fluid directed to H.P. separator through a well fluid pre-heater. Here three phase separation is being carried out. Oil separated from H.P. separator goes to M.P & then L.P. separator and then exports to onshore through pipe line by four pumps at a pressure of 50kg/sq.cm. Gas from H.P, M.P & L.P separator is going to compressor unit (three stage compressors) where compression takes place with passing through suction KODs & intercoolers. The gas from cooler enters glycol contactor for dehydration. Finally gas is exported to on shore through 36’’ pipe line at a pressure of 70kg/sq.cm. Part of gas is using for H.P & L.P flare pilot and fuel gas.

Design capacity: 90,000 barrels/day crude oil & 100 MMSCFD associated gas.

JOB PROFILE

• Plant commissioning, start up, stabilization and operation.

• Routine checkup of all process parameters & equipments.

• Maintaining safe and smooth operation and safe working procedure in the plant.

• Controlling & maintaining Process Parameters as per technical specification.

• Co-ordinate all operations & maintenance activities to attain production target.

• Reporting all abnormalities & failures to control room & take corrective action.

• Initiating safe shutdown activities.

• Safe Handling of plant during power failure and utility failure.

• Initiating PTW

• Maintaining records for auditing and for updating check list.

• Co-ordination with technical & maintenance service department for smooth plant operation.

Advanced Training & familiar with:

• H2S & BA Training

• Confined Space Entry Training Certificate

• Gas Compressors

• DCS (YOKOGAWA, HONEYWELL, FOXBORO)

• Hydrotreater & Hydrogen Unit.

• Dehydration Units.

• PTW (Permit To Work)

• Well Head Operations

• Training for new employees

• Fire & safety training

• Gas testing course

• Fire & Gas detection, ESD system

• Environmental safety training

• HSE (Health, Safety & Environment)

• Different levels of computer training

• Performance test of units.

• Gross Leak Test.

 

Duties & responsibilities:

1. Ensuring Safe & normal operation of plant & equipments.

2. Lead & co-ordinate panel operations and field operations.

3. Verify and modify cause & effects of fire & gas and ESD systems.

4. Taking corrective action for abnormalities reported.

5. Lead Field & Panel operations in case of emergency such as ESD, PSD, gas leak, fire, evacuation etc.

6. Making work orders for maintenance activities through SAP.

7. Co-ordinate all operations & maintenance activities to attain production target.

8. Co-ordinate work permits (PTW) for maintenance teams & contractors and close permits.

9. Ensure all operations to be carried out according to SOP (Standard Operating Procedure).

10. Co-ordinate Pigging operations, Adjust chemical dosing, Equipment change over , Scheduled maint., Inspection, Contract jobs.

11. Carrying out normal start-up, normal shut-down, and emergency shut-down of plant & equipments.

12. Plant pre-commissioning, commissioning, start up, stabilization and operation.

13. Acquired good communication skills to ensure successful working relationships with EPC team in construction, pre commissioning & commissioning phases.

14. Understanding of all company procedures, PTW System, Safety systems, Review of Manuals, Start up procedures, P & ID.

15. Co-ordinate plant/section or equipment isolations (PRC) for maintenance & inspection.

16. Actively participating in Emergency/Fire drills.

17. Working as Coach for training junior employees.

18. Taking weekly check-lists for Fire &Safety equipment; Oil & Chemical stock; Emergency equipment; Lightings; Communication equipment etc.

19. Meet company target efficiently & safely.

20. Communicate with field, upstream & downstream facilities, fire station etc in case of emergencies.

21. Ensure all operations to be carried out according to SOP (Standard Operating Procedure).

22. Co-ordinate Pigging operations, Adjust chemical dosing, Equipment change over, Scheduled maint. Inspection, Contract jobs.

 

Fire and Safety PTW, H2S/BA, ESD, PSD, F&G SYSTEM ETC