CV, Internationally Experienced Pipeline Design And Implementation Engineer

I am currently available for work
Serial No: 5405
(05/04/1982, male)
Skills keywords: piping / pipeline design, piping / pipeline material, support designing, upstream
Current location: India - View on map

Piping/Pipeline Engineer

Centroid Technical Services Ltd. ( PMC) (Subsidiary of Petronas)

November 2011 - June 2012 Juba, South Sudan

  • Worked as a PMC for Piping & Pipeline Engineer for Field Surface Facilities.
  • Worked for closing provisional acceptance and final acceptance of Produced Water Re-injection Plant.

Lead Piping & Pipeline Design Engineer


February 2010 - November 2011 (1 year 10 months) Khartoum, Sudan

  • Worked as a Piping & Pipeline Engineer for Field Surface Facilities.
  • Preparation of work schedule and making a thorough study of work scope.
  • Site survey for Pipeline trench layout
  • Preparation of Pipeline alignment drawings (Trunk line & Flow Lines for injection water and Crude Oil)
  • Preparation of Plot Plan, Piping Layout, Piping Isometrics and pipe support drawings for Oil and Gas Manifolds.
  • Co-ordination with a team member of 5 nos.
  • Site visits for preparation of As-built drawings
  • Preparation of MR documents, technical queries and Technical Bid evaluations for piping & pipeline materials.
  • Worked for Oil & Gas Manifold, Water injection manifold and in Field processing Facilities (FPF).
  • Coordination with departments like Civil, Process, Electrical, Mechanical & Instrumentation as required.
  • Piping for Pump, Heat exchanger, 3 phase separator etc.
  • MTO generation.
  • Worked with oil operating companies like PDOC/DPOC, GNPOC, WNPOC & Petro-energy.

Piping/Proposal Engineer

Petrofac International Ltd (EPC)

November 2008 - February 2010 (1 year 4 months) Sharjah, U.A.E

  • Worked as a proposal Engg for several proposal Project my role was to report to Principle Engg
  • Co-ordination with proposal team i.e Process and Instrumentation Department.
  • Generation of Technical Query.
  • MTO generation.
  • Generation of Bill-4, Bill-8 & Bill-9.
  • Costing Bid tab Documents
  • Preparing Technical Document Register (TDR), identifying requirements and scope of work.
  • Reviewing the ITB (Invitation to Bid) submitted in the proposals stage
  • Issuing inquiry requisitions, analyzing techno-commercial vendor offers, preparing equipment / material
  • Man-hour estimation. Estimating type of software's and number of license required to execute the project.
  • Verifying and checking of Pipe Class, Lines from Line List, PID and Piping Material Specification Sheets.
  • Computing pipe wall thickness and PMS checking.
  • Proposal done for:
    • Abu Dhabi GASCO: Ruwais 4th NGL Train, valued at 2 Billion USD.
    • Kharyaga Field Development Phase-2, valued at 1.5 Billion USD.
    • El-Merk Based in Algeria, valued at 2.2 Billion USD.
  • Notable Highlights: Instrumental in the setup of Microsoft Access Package for bill generation (Bill-4, Bill-8 & Bill-9).

Piping Engineer

Bechtel India Pvt. Ltd (EPC)

June 2004 - November 2008 (4 years 6 months) Gurgaon, India

  • Piping & Layout for Instrument Air, Service Air, Hydronic System, Pump, Heat exchanger, Condensate removal system.
  • Designing and sketch generation of support for both Critical & Non-Critical System for small bore and large bore.
  • Coordinating with the Civil Department for location of piles/foundation required for pipe support.
  • Spring calculation required for support design. Critical System - small bore and large bore (below 10")
  • Routing (Modeling) of pipe using modeling software , ASME codes and Engineering Design guides.
  • Selection & Modeling of support from support catalogue.
  • Acquired experience in steel detailing of pipe rack or turbine & boiler building used for supporting and routing pipes.
  • Experience in TEKLA Structures (Xsteel) & AutoCAD for checking and preparing of fabrication or shop drawings.
  • Power Projects: Worked in Coal Fired Power Project generating a power of 2x815MW (Using a Supercritical Boiler).
  • Smelter Project: Worked in smelters for Utility Water and Waste Water Systems.

Piping Engineer

Shree Designers Engineering

June 2003 - June 2004 (1 year 1 month) Mumbai, India

  • Worked as Graduate Engineer Trainee
  • Support Designing: Engineered Support, Hangers etc
  • Civil detailing in X-steel
  • Detailing of supports, preparation of fabrication drawings for supports

IT Skills

Operating System: DOS, Windows 98, and Windows 2000 Pro, Windows XP

Software Package: Piping Software 3, ‘Dimensional Modeling System, MS Office (MS Access), AutoCAD 14 & 2000, AutoCAD2009, Microstation, Teamwork, Info Works, Bentley's Navigator, NavisWorks  JetStream v5, PDS,  "X-Steel "(8.0 to 11.1), SDS/2 (Steel Detailing System) CADWorx  Plant Profession 2009.

Skills & Expertise 

  • Piping Layout
  • 3D Modeling
  • Materials
  • Pipeline
  • ASME
  • Upstream Oil & Gas Manifolds
  • Power Plants.
  • Detail Engineering
  • Well Head
  • Field Processing Facilities (FPF)


Spoken languages: english
Location I am interested in working: