Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, Civil Inspector or QA, QC targets Middle East or Africa

I am currently available for work
Serial No: 16846

List top 5 skills: 
Short Bio:

More than 12 years of diversified experience in Project Management Team, Quality Assurance & Control and Construction Supervision in Civil, Architectural, Building, Steel Structures, Structural and Infrastructures works in the sector of Oil and Gas Project’s, Power Plant, Booster Station, Substation, Main Control Buildings, Slug Catcher, LSFO/FG Pumping Station, Gas Pigging Facilities, Bypass Fuel Station, Mining, Bridge, Roads and High-rise Buildings mostly in EPC and Client Representatives or

Current location: 

Metro Manila, Philippines - View on map

Nationality: 

Filipino

Preferred Sector of Employment: 

Oil, Gas and Energy, General Management

Spoken languages: 

english

Locations I am interested in working:

Anywhere



QUALIFICATIONS

 Bachelor’s Degree in Civil Engineering from SJIT

 Registered Civil Engineer by Professional Regulation Commission Philippines

 Extensive project management experience including the development of project scopes, project budgets and execution management and quality control & assurance.

 Knowledge in cost reduction techniques and budget management

 Excellent understanding of industry best practices

 A true team player and multi-tasked.

 Ability to adapt to any environment in short time.

COMPETENCIES

 Project Quality Management

 Knowledgeable in STAAD / ETABS/MIDAS/Auto Cad/ MS Project & Primavera P3

 Can Operates Total Station; Lieca, Topcon, Nikon & Sokkia

 Technical Plan Execution

 Quantity Surveying

 Safety Management and Risk Assessments

 Advance Critical Thinking

 Structural Steel Supervision

 Strong Decision Maker

 Construction Management

 Proficient In Solid Works

 Organize and Detail Oriented

 Strong Management Skills

 Project Budgeting / Cost Control

 Knowledgeable in International Standards such as ARAMCO, ACI, AISC, UBC, ASTM, British (BS) and (DIN) European Standards.

 Quality Assurance / Quality Control

 Baseline Schedules Creation

 Operational Analysis

 NDE Personnel Level II-Magnetic Particle testing

PROFESSIONAL EXPERIENCES:

Civil Inspection Engineer (PMT)

Period: June 9, 2014 to Present

Owner: Saudi Aramco & Power Cogeneration Plant Company

PMT: Parsons Brinckerhoff Arabia

Address: Ground Floor, Arabian Drilling Co.

Prince Sultan Bin Adulaziz Road, P.O. Box 1794, Al Khobar 31952, KSA

Project Name: SAUDI ARAMCO Cogeneration IPP Projects

Project Location: (Hawiyah Gas Plant, Abqiaq Gas Plant and Ras Tanura Refinery)

Job Description;

• Review of applicable Inspection Test Plan, Quality Plan and Procedures.

• Review and Validation of Inspection Assignments documentation (technical aspects, reference documentation, schedules, milestones, reporting, logistics, coordination procedures.)

• Execution of inspection and reporting including treatment of non-conformities.

• Carrying out receiving inspection, visuals inspections, dimension control, final inspection and etc. as required.

• Interpretation of test results & inspection.

• Participate in all kick off meetings of the Project.

• Monitoring and Inspection of civil works refer as architectural &buildings, structural steel structures and civil, plumbing, RTR pipes, Embedded items & Underground facilities for Fiber optic cables and electrical as per approved ARAMCO procedures & standards and relevant codes.

• Prepare inspection reports on time and submit to Team Leader.

• Maintain daily notes and /or records as required, including but not limited to; Inspection reports, notes of operators deficiencies, Safety noncompliance, and any other events pertaining to the civil works.

• Safe execution of all the civil, architecture and structural related activities and all external services by ensuring project works are carried out in accordance to approved instructions, company procedures and work methods/method statement. In addition to assist in developing safety programs and enforcing safety regulation, safety procedures, conducting safety audit in order to achieve lost time idle/accident/incidents (LTI) in all work activities.

• Randomly site visit for civil and structural works at contractor’s work or fabrication shops outside the work site.

• Issued NCR & PAR for any major deficiencies found during the construction phase of the Project, follow up NCRs with the Contractors, may recommend resolution, and also verify resolution for the NCR & PAR closing. Issue summary reports for NCR & PAR.

• Respond to Technical Queries (TQ) as raised by the EPC Contractor.

• Review, comment and approve the Project Quality Documentation in accordance with ARAMCO Engineering Standards, Procedures & materials system specification (e.g. Quality Manual, Quality Plan, QA/QC Procedures, site work instructions, Inspection and Test Plan, etc.)

QA/QC Engineer-Civil/Steel Structures/Architecture

Period: April 4, 2011 to April 30, 2014 (3 Years)

Client: Kuwait Oil Company

Hyundai Engineering and Construction Company Limited.

PO Box 10389, Mina Shuaiba 65454, Kuwait

Project Name:KUWAIT OIL COMPANY <KOC1> EF 1713 ( Installation Of Low Sulfur Fuel Oil, Fuel Gas AND Gas Oil Pipelines form Mina Al-Ahmadi ( KNPC Refinery ) to Sabiya & Doha Power plant with Booster station ( BS-180), Pumping station, Export Gas Facilities, Pigging Facilities & 6 Main control Bldg & Substation.

Duties and Responsibilities;

• Approved QA/QC Civil Inspector by owner Kuwait Oil Company.

 Evaluate non-conformances and determine their acceptability/criteria or upon consideration to the item’s criticality rating; record and cross-reference deviations or concessions, and maintain a deviations and concession registration.

 Develops and implements methods and procedures for disposition of discrepant material.

 Re-inspect post-surveillance modifications, corrective action and replacements in accordance with the original requirements, recorded and cross-referenced.

 Analyze failure, corrective and preventive action to respond to customer/client complaints.

 Create and maintain company quality documentation, such as quality manuals, quality procedures, etc.

 Ensure timely resolution of supplier failure, corrective actions and preventive actions.

 Participate in Review/Comment/Approval of the Contractors Quality Control Plans and all other Quality documents for Client submittal & approval.

 Preparation, implementation and monitoring of Quality Assurance Manual, Quality Control Plans, Suppliers’ Quality Systems, Contract Quality Plan, Departmental Procedures and Work Instructions.

• Responsible for raising NCR (Non-conformance report) encountered at site.

• Check and Monitor if the method statement of every phase of works are being followed on actual execution of works.

• Ensure that all works are in properly documented with Inspection and Test report (ITR).

• Submit Reports to Construction manager and QA/QC Manager for bi weekly monitoring of the ITR activities and Receiving Materials.

• Conduct Pre-Final Inspection together with the CLIENT and Make Snag Report/Punch list to be submit to QA/QC Manager.

QC Civil Inspector-Civil/Architecture/Steel Structures

Period: April 21, 2008 to Jan 2, 2011 (2 Years and 9 Months)

Hyundai Engineering and Construction Company Limited (EPC)

Sarir, Libya

Project Name: 3 X 250 MW Simple Cycle Gas Turbine Power Plants

Duties and Responsibilities;

• Read, Study and Understand the METHOD of STATEMENT of the WORK.

• Conduct Inspection for scaffoldings, formworks, reinforcement bars sized, spacing and cutting/bending, alignments, elevations, locations, for all sub-structure with respect to approved shop drawing and safety requirements, and specifications prior to concrete casting.

• Monitor the batching time, time of arrival at site, slump and flow of the concrete delivered at site up to the time of finished of concrete pouring.

• Follow up and Monitor the concrete strength of samples taken during concrete casting.

• Monitor daily activities at site and if found some damage, scratch and dent at tile cladding metal ceiling and Door Architrave ,report immediately to QA/QC Manager and make instruction to the sub-contractor to replace the damage material or make NON CONFORMANCE REPORT

• Conduct Inspections together with the Consultant for tile works, ceiling, claddings and glazing as per the ITP.

• Conduct inspection with the Consultant of scaffoldings, formworks, reinforcement bars sized, spacing and cutting/bending, alignments, elevations, locations, for all sub-structures and super-structures with respect to approved shop drawing and safety requirements, and specifications prior to concrete casting.

• Monitor the batching time, time of arrival at site, slump and flow of the concrete delivered at site up to the time of finished of concrete pouring.

• Give Instruction to workers to maintain the curing of the structure until it will reach the desired strength.

• Follow up and Monitor the concrete strength of samples taken during concrete casting.

• Conduct inspection prior to block laying, plastering, screed concrete and inspection prior to painting works at RC walls and Block walls.

• Invite Consultant in conducting/witnessed for the field density test done by Independent Testing Laboratory (ITL) from formation level, granular sub base and wet mix materials

• Monitor test result either passed or fail for sampling and field density test (FDT) conducted before laying next layer during construction of Road works

• Monitor the temperature for the AC Base coarse and AC Wearing coarse delivered at site

• Invite Consultant in Conducting/Witnessed during Coring Test for the Asphalt

• Monitor the Test Result after Sampling for the Granular Sub base, Wet Mix, Asphalt and Coring Test.

• Monitor of Temperature & Rate of Application of Prime Coat and Tack Coat.

• Checking MILL CERTIFICATES and DELIVERY NOTE of the RAW materials of steel structure as per the Approved materials by the CLIENTS if it is in accordance to the Specification of the Standards as per the generals notes

• Check and monitor the quality of works during fabrication to avoid some negative comments from the CLIENT

• Check and Monitor during (Cutting, Fitting and Welding) of RAW MATERIALS as per the Approved Shop Drawing

• Conduct/witnessed together with the Consultant for NDT Inspection done by INDEPENDENT PARTY and entertain questions/comments regarding welding Inspection for the fabricated materials.

• Conduct/witnessed together with the Consultant for Sand blasting Inspection and entertain comments for the sand blasted materials

• Conduct/witnessed together with the Consultant for painting Inspection (thickness) from Prime coat, mid-coat and Steel master paint up to the final coating prior to delivery and installation at Project site

• Invite Consultant during checking for the Galvanized fabricated materials prior to Delivery and Installation.

Civil Engineer (Owner)

Period: February 25, 2005 to February 27, 2008 (3 Year)

FIRST QUANTUM MINERALS LTD

Level 1, no# 24 Outrum street, West Perth, Western Australia, 6005

KINGAYAMBO MUSONOI TAILING, S.A.R.L

Site Office: NRC, Lubambashi, Villa Muanna, Quartier du Golf, D R Congo, Africa

Project Name: Construction of Copper & Cobalt Mining Plant

Duties and Responsibilities;

• Monitoring and Supervision for installation of rebar/Shuttering/concrete works in conformance to civil and structural drawings.

• Provide reports and supporting information to Construction Manager, ensuring that the reports, records, timesheets, and invoices are up to date and properly filed.

• Assist the Contractors formulate construction plans, work methods that will improve efficiency and productivity on site and daily activity schedules that are realistic and workable and will help achieve desired results.

• Review compliance with Engineering Standards, Specifications and National Standards.

• Respond with impartial unambiguous responses that do not contain preference engineered solutions.

• Monitor engineering execution against the planned delivery

• Participate in Quality Control inspections on site

• Assist Project Superintendent by enforcing quality control, expediting subcontractors. Continually update drawings with changes as issued by Consultants.

• Inspect false work in conformance of the approve drawings.

• Rebar Condition: Verify that rebar is free of oil, dirt, mud, and excessive rust and free from damage in shipment to the job site, or on the job site.

• Rebar Laps and Bends: Verify bar laps for proper length, stagger and bar bends for minimum diameter, slope and length.

• Responsible for the implementation of the full scope of works for the Civil, Buildings and Structural activities.

• Oversee piling and foundation installations

• Oversee installation of structural steel

• Ensure works outputs are technically high standard and activities profitable.

(QA/QC Engineer) (Architectural, Civil and Structural)

Period: January 21, 2003 to February 15, 2005 (2 Year and 1 Months)

MEGAWORLD CORPORATION

#330 Gil Puyat St. Brgy. Bel-air, Makati City, National Capital Region, Philippines

Project Handled: High-rise Bldg, Five Star Hotels and Condominium in Taguig City (Belagio III) and Makati City (One Central)

Duties and Responsibilities;

• Inspects materials, grades and other works for compliance with the specification, details, plans and standard construction practices to include sampling / testing of concrete batches / specimen and other various materials for testing as specified in the contract.

• Conduct site inspection and authorized correction to be made within the compliance of job specification and project procedures.

• Observes work in progress to ensure that procedures and materials used conform to specifications and ensures that proper safety and traffic control procedures are followed.

• Investigates alleged violation of the construction code and related ordinances, and issue notices of violation where the unsafe or illegal condition exists.

• Inspect false work for conformance to design drawings.

• Conduct inspection of all moulds prior to concrete pouring based on plan / shop drawings.

• Witness all concreting works such as beams, slabs, columns, pre-cast and other concrete forms necessary for casting in the project.

• Maintain continuous inspection of works at site and issue the necessary Remedial Notes for any defected works observed at site.

• Monitoring Non-conformance`s and closing out by corrective / preventive actions.

• Ensure all Tests are done witnessed and inspected for Civil (Concrete, Aggregates, Steel, FDT, Pile Tests& etc.

Assistant Resident Engineer

DEPARTMENT OF PUBLIC WORKS AND HIGHWAYS (DPWH) 1st Engineering District

Capitol road, Surigao City, Region XIII, Mindanao

Period: July 2002 to December 2002 (6 Months)

Duties and Responsibilities;

• Assist in the supervision, monitoring and evaluate project in accordance with the program of works and specification.

• Assigned in Embankment, Road works, clearing of Roads, Bridges and School Buildings.

• Assume role as ResponsibleEngineer for general monitoring and over-all responsible for the safety at site and in the design & technical assurance of the project.

• Plans, pavements, curbs, surface mats, membranes, and other improved areas using paving and surfacing procedures. Takes soil, aggregate, asphalt, and concrete samples for laboratory tests. Interprets construction drawings and surveys using information such as sub grade contours and grade alignment. Inspects pavements for surface, base, and sub-base damage or defects. Repairs damaged or defective areas by removing and replacing joint and crack sealant, surface overlays, and seal coats. Determines material and equipment requirements and prepares cost estimates for construction activities. Provides erosion control.

• Supervise and coordinate activities of workers engaged in spreading, rolling, tamping, and patching asphalt or similar material to form surfaces of highways.

• Prepared and submit weekly accomplishment report to the resident engineer.

• Supervision of asphalt projects, paving personal, and trucks on jobsite. Ensuring Quality Control was to meet or excide customer’s expectations. Dealing with Chief Engineer and District Engineer.

TRAININGS AND SEMINARS:

Magnetic Particle Method (Level I1)

December 5-11, 2009

SNC-Lavalin International

Function Hall, Sarir, Libya

500 Hours Training Certificates) Institution of Occupational Safety and Health (IOSH) and (NEBOSH) Occupational Health and Safety Certificates

July 2, 2009 to November 10, 2009

Tazerbo, Libya

SAFETY OFFICERS TRAINING COURSE

For Construction, Petrochemical and Gas Industries

RODECH Training Services Link International Inc.

January 12-28, 2009

GCC, EDSA Guadalupe, Makati City, Philippines

DRILLING TECHNOLOGY

RODECH Training Services Link International Inc.

January 12- 14, 2009

GCC, EDSA Guadalupe, Makati City, Philippines

H2S SAFETY AND SCBA INSTRUCTION

RODECH Training Services Link International Inc.

January 15, 2009

GCC, EDSA Guadalupe, Makati City, Philippines

STANDARD FIRST AID WITH PROFESSIONAL CPR

RODECH Training Services Link International Inc.

January 16, 2009

GCC, EDSA Guadalupe, Makati City, Philippines

BASIC RIGPASS SAFETY ORIENTATION

RODECH Training Services Link International Inc.

January 17 – 28, 2009

GCC, EDSA Guadalupe, Makati City, Philippines

Appreciation Seminar on Water Supply Development

Mar 4, 2005 – Mar 5, 2005

Philippine Water Works Association, Inc

Lucianna Inn and Convention Center, Butuan City

Staad PRO 2007

April 1-30, 2009

Microcadd Technologies Company Incorporated

Suite 500 Dona Conception Blgd. AranetaCenterCubao, Quezon City