Tel: +44 (0) 2079890750

Global Recruitment Experts

Access to millions of CV's and
thousands of international jobs

CV, CAD Design Engineer Seeking Work Globally

I am currently available for work
Serial No: 48877
(04/03/1976, male)
List top 5 skills: cad designer, industrial engineer, product designer
Qualifications and Skills:

Sep 2008 – Sep 2009 MSc in Advanced Technology Management (University of Wolverhampton)

Sep 2005 – June 2008 BSc (Hons) in Product Design and Innovation (University of Wolverhampton)

Sep 1994 – Sep 1998 BSc (Hons) in Industrial Engineering (Azad University of Tehran)

Previous Employment Details:

Jun 2014 Tooling Design Engineer at ERODEX Ltd, Birmingham , UK (http://www.erodex.com/)

May 2012 – June 2014 Tooling Design Engineer at TRAC Tooling Engineering Ltd, Birmingham, UK (http://trac-group.com/)

July 2010 – February 2012 3D CAD Designer at WINTECH Facade Engineering Ltd, Birmingham, UK (http://www.wintech-group.co.uk/)

Current location: 

England, United Kingdom - View on map

Nationality: 

British

Preferred Sector of Employment: 

, multilingual, Travel and Tourism

Spoken languages: 

English - Persian - Azerbaijani

Locations I am interested in working:

Anywhere



EDUCATION

Sep 2008 – Sep 2009
MSc in Advanced Technology Management
(University of Wolverhampton) (Pass)

Key modules undertaken as part of this course include:

Computer Aided Manufacturing (CAM); Sustainability and Life Cycle Engineering

Strategic Quality Management (Statistical Process Control, Lean and Six sigma studies); CAD & Product Definition

New Product Development (NPD case study); Engineering Materials

Rapid Prototyping and Manufacturing Technologies; Research Methods; Postgraduate Dissertation (Implementing Product Data Management system on SMEs with application of PDMWorks)

Sep 2005 – June 2008
BSc (Hons) in Product Design and Innovation
(University of Wolverhampton) (2:1)

Key modules undertaken as part of this course include:

CAD & Development; Sustainable Technology; Engineering Practice; Design Practice; Interactive Distributed Simulations

Real Time CAD; Project Planning; Advanced CAD Applications; Innovation and Enterprise

Collaborative Design; Project (Designing and prototyping a new equipment called Pizza pan rim cleaner including Finite Element Analysis with ANSYS)

Sep 1994 – Sep 1998
BSc (Hons) in Industrial Engineering
(Azad University of Tehran) (GPA of 15.35)

Key modules undertaken as part of this course include:

Industrial Draughting and designing; Precision measurement Lab (Vernier, Micrometer, and etc; Quality Management (Statistical Process Control); Statistics; Production Control; Project Management; Preventive Maintenance and Repair Planning; Management Information System

Inventory control and Management; Manufacturing shop floor layout design; Final year project on Conveyor belt production process including: factory layout design optimization for manufacturing of a whole Conveyor belt product, optimized usage of labour and equipment, improving and optimizing the material flow from stock through manufacturing and assembly line to the final product

CERTIFICATES

Additional courses studied include:
Jan 2016 Operations management and Process improvement (Lean & Six Sigma) – Coursera (Distinction)
Sep 2016 Quality Engineering & Management (Statistical Process Control & Six Sigma) – EDX (Distinction)
Apr 2015 Applications in Engineering Mechanics – Coursera (Distinction)
Mar 2015 Advanced Engineering Systems in Motion (2D & 3D Motions) – Coursera (Distinction)
Dec 2014 Fundamentals of Fluid Power – Coursera (Distinction)
Jun 2014 NX Automotive CAD Powertrain – MyIGetIt Online Course (Pass)
Jun 2014 NX Automotive CAD Structures – MyIGetIt Online Courses (Pass)
Apr 2014 NX Automotive CAD Chassis – MyIGetIt Online Course (Pass)
May 2014 CATIA Automotive CAD Essentials – MyIGetIt Online Course (Pass)
May 2014 NX Automotive CAD Interior Trim – MyIGetIt Online Course (Pass)
May 2014 NX Automotive CAD Essentials – MyIGetIt Online Courses (Pass)
Mar 2014 CATIA Automotive CAD Chassis – MyIGetIt Online Course (Pass)
Jan 2014 Geometric Dimensioning and Tolerancing (GD&T) – MyIGetIt Online Course (Pass)
Oct 2013 Design Creation of Artifacts in Society – Coursera (Distinction)
Apr 2005 Electro-technical Technology Installation – Solihull College (Distinction)
July 2004 Computer Aided Draughting (2D & 3D AutoCAD) – Bourneville College (First Class)
Oct 2003 IT Practitioners (ICT Systems Support) – Bourneville College (First Class)
Jan 2002 Integrated Business Technology (Stage III) – Solihull College (First Class)

EMPLOYMENT AND EXPERIENCE

Jun 2014 Design Engineer
ERODEX, Birmingham

The projects I have been involved with centre around designing a set of tools for casting components to be converted into final machined parts (e.g. blade, vane) which were received from Rolls Royce, SIEMENS and TRAC using CAD software (Siemens NX 9.0). The tooling set design includes: Grinding, Electrode, EDM, Drilling, Milling, Laser, CMM and Welding fixtures as well as gauges such as: Sight gauge, Clock gauge, Go-No Go gauge, and Depth gauge. I was involved in liaising directly with the design manager and was responsible for delivering the various projects on time and to tight deadlines. I was also extensively involved in quality control procedures and checking the final fixture assemblies after manufacturing for quality.

I was also involved in projects involving stress analysis (hand calculation) tasks for lifting equipment received from Hydro Ltd. This entailed preparing documents and reports such as Preliminary Design Review (PDR), Critical Design Review (CDR), Manufacturing Detailing Report (MDR), OMSD Documentation, stress analysis reports, PUWER Documentation, and Risk Assessment Reports for Hydro projects.

And finally, I was involved in a project for McLaren car Company as part of a design team. The project was to design a sight gauge for the whole perimeter edge of the manufactured car roof.

May 2012 – June 2014 Design Engineer
TRAC Tooling Engineering Ltd, Birmingham

As a Design Engineer I was involved in many tooling projects, particularly fixture tooling. The tooling set project was received mainly from Rolls Royce, Snecma, and Alstom using CAD software (Siemens NX 9.0). The project set included EDM fixture, grinding fixture, Electrode design, CMM fixture, Welding fixture, inspection fixture, etc.

For each project I was involved in concept creation (sketching and rough 3D model of the concept) through to detail drawing, checking the manufacturing drawings, final assembly and manufacturing.

July 2010 – February 2012
3D CAD Designer
WINTECH Facade Engineering Ltd, Birmingham

I was involved in major, high profile facade engineering projects as part of a team, finishing and delivering the projects to clients according to plan and to tight deadlines. Successful completion of the projects subsequently brought hundreds of thousands of profit to the companies involved and involved considerable public exposure and promotion.

Creating elevation, plan, section details, location & manufacturing drawings for Timber Cladding, Aluminium & Timber Windows, Aluminium Curtain Wall using AutoCAD 2011

BSkyB wind turbine project: As part of a team I designed complex sheet metal panels with CATIA (Surface design) and analyzed the complex panels with CATIA Generative structural analysis. These panels were manufactured and assembled around wind turbines according to client’s architecture plan.

Dundee Swimming Pool project: As part of a team I designed 3D models of Bullnose and soffit components models in SolidWorks from concept to manufacturing stage. These panels were assembled around the roof edge of the swimming pool.

Big Yellow Box Storage project: As part of a team I designed 3D models of Bullnose and soffit components from concept to manufacturing stage. These panels were assembled around the roof edge of the Big Yellow Box Storage.

Villamar project: As part of a team I designed 3D models of door frames and created manufacturing drawing details in SolidWorks for manufacturing.

Beetham London project (Blackfriars): As part of team roof guiding profiles were created in SolidWorks and a model of a building roof was created in CATIA.

Sep 2008 – Dec 2008
Teacher Assistant at Pendeford Business & Enterprise College, Wolverhampton – Student Associate Scheme (Subject: Maths)

Establishing positive relationships with the pupil; Involvement in supporting the pupils’ learning

Learning strategies to manage the behaviour of pupils; Planning and delivering a lesson to a group of year 9 pupils

Mar 2003 – Aug 2003
Librarian at Bourneville College, Birmingham

Library counter work; Shelving books according to the Dewey Decimal System; Supporting students on the IT help desk

Updating reader records and the library catalogue;  Labeling books and using Microsoft Excel to produce library user statistic

SOFTWARE AND HARDWARE SKILLS

Proficient user of Microsoft Word, Excel, Access, Outlook Express, and PowerPoint; Microsoft Project

Computer hardware, software, and network installation and configuration (ICT system support); AutoCAD 2D and 3D

Siemens NX 9; CATIA V5 (Solid modelling – Surface modelling – Drafting – Generative structural analysis)

PDMWorks in SolidWorks (Product Data Management); SolidWorks; ANSYS Structural Analysis; PowerMILL Delcam

PRACTICAL SKILLS

Rapid Prototype Manufacturing; Vertical Router Milling Machine (Denford); Laser cutting machine

Turning and milling; Plastic Vacuum forming machine; Sheet metal forming; Welding; Coordinate Measure Machine (CMM) (Virtual DMIS software)

Selective Laser Sintering Machine (SLS); Fused Deposition Modelling Machine (FDM); Zwick-Roell 5113 thermoplastic impact test machine

Zwick-Roell 1474 steel tensile test machine (TestXpert software)

OTHER SKILLS

Analytical and numerical skills: Data analysis (in EXCEL) by collecting, sampling and analyzing data in Design of Experiment, Quality engineering control charts, and statistical process control to support management in decision making

Writing and preparing presentations and reports: Preliminary Design Review (PDR), Critical Design Review (CDR), Manufacturing Detailing Report (MDR), OMSD Documentation, stress analysis reports, FMEA report, PUWER Documentation, Risk Assessment Report

Member of the IET; Full UK Driving License